1014001710 Front Engine Cover for Geely MK

Product Introduction

1014001710 Front Engine Cover for Geely MK

Our Front Engine Cover is a key protective component for vehicle engines, crafted from high-strength ABS or PP composite material—lightweight yet impact-resistant.

It shields the engine and internal parts (like hoses, wires) from dust, gravel, and external impacts, blocks high engine heat from damaging nearby components, and reduces cabin noise from engine vibration. Matching OEM dimensions for most passenger cars/SUVs, it enables easy installation while keeping the engine bay neat, boosting long-term vehicle reliability.

Product Advantage

1.High-Strength ABS+PP Composite Material

Our Front Engine Cover adopts automotive-grade ABS+PP composite (tensile strength ≥45MPa, impact strength ≥20kJ/m²), balancing lightweight (30% lighter than pure metal covers) and durability. It withstands 120°C continuous high temperatures (engine bay average temp) without deformation, passing 500-hour heat aging tests—service life up to 8+ years, 40% longer than ordinary plastic covers.

2.360° Engine Bay Protection

Beyond blocking dust, gravel, and debris from entering the engine bay, it resists corrosion from antifreeze, engine oil, and other liquids (passing 300-hour chemical resistance tests). The raised edge design prevents water accumulation on the engine surface, avoiding short circuits of wires/hoses—effectively reducing engine component maintenance costs by 25%.

3.Noise & Heat Insulation Dual Function

The built-in EVA sound-insulating layer reduces engine vibration noise by 8-12dB (tested in 60km/h driving), lowering cabin noise for a quieter ride. It also blocks 60% of engine heat from radiating to the hood, keeping the hood surface temp 15-20°C lower—preventing paint fading and protecting nearby plastic parts from heat damage.

4.98% OEM-Compatible Universal Fit

Through 6000+ vehicle fitment tests, this Front Engine Cover matches 98% of mainstream passenger cars/SUVs. It follows OEM hole positions strictly—no drilling or modification needed, and installation takes only 15 minutes with standard tools, ideal for garages or DIY users.

5.UV & Aging Resistance

The surface uses automotive-grade anti-UV coating (thickness 15-20μm), passing 1000-hour xenon lamp aging tests (simulating 5 years of outdoor use) with no fading or cracking. The material is also RoHS 2.0 compliant (no toxic substances), ensuring safety for both the vehicle and the environment.

Technical Parameters

1.Material Composition

Main material: Automotive-grade ABS+PP composite (ABS content 60%, PP content 40%)

Tensile strength: ≥45MPa (test standard: GB/T 1040.2-2006)

Impact strength: ≥20kJ/m² (notched, -30°C low-temperature impact; test standard: GB/T 1043.1-2008)

Density: 1.15-1.25g/cm³ (lightweight, 30% lighter than pure steel covers)

2.Dimensional & Installation Parameters

Adaptation range: Fits 98% mainstream passenger cars/SUVs (overall size varies by model, matching OEM dimensions)

Thickness: 3.5±0.2mm (uniform thickness for balanced strength)

Installation hole diameter: 8-10mm (tolerance ±0.05mm, precise alignment with OEM mounting points)

Net weight: 450-650g (varies by model, no extra load on engine bay)

3.High-Temperature & Environmental Resistance

Continuous heat resistance: 120°C (no deformation after 500h constant temperature test; test standard: GB/T 1634.2-2004)

Short-term heat resistance: 150°C (30min, no cracking or discoloration)

Chemical resistance: Resists engine oil, antifreeze, and brake fluid (no swelling after 300h immersion test)

UV resistance: Anti-UV coating (thickness 15-20μm) passes 1000h xenon lamp aging test (no fading, gloss retention ≥85%)

4.Sound & Heat Insulation Performance

Noise reduction: Built-in 2mm EVA sound-insulating layer, reduces engine vibration noise by 8-12dB (tested at 60km/h driving speed)

Heat insulation: Blocks 60% of engine radiant heat, lowers hood surface temperature by 15-20°C (vs. uncovered engine bay)

5.Compatibility & Compliance

Applicable engine types: adapts to naturally aspirated, turbocharged gasoline/diesel engines

Installation method: Direct bolt-on (no drilling/modification, uses original vehicle fasteners)

Certifications: RoHS 2.0 compliant (no lead, cadmium, mercury); meets ISO 1043-1 automotive plastic standards

Quality inspection: 100% dimensional inspection before delivery, with a pass rate of 99.9%

Product Uses

Here are specific application scenarios of Front Engine Cover:

1.Daily Urban Commuting

Perfect for city drivers facing frequent dust, road debris, and short-stop trips. The Front Engine Cover blocks urban dust from piling on engine parts (like wires and hoses), reduces cabin noise from engine vibration during traffic jams, and keeps the engine bay neat—saving time on regular engine cleaning and preventing minor debris-caused wear.

2.Rainy & Dusty Areas

Ideal for regions with heavy rain, sandstorms, or frequent road construction. Its raised-edge design prevents rainwater from seeping into the engine bay (avoiding wire short circuits), while the tight fit blocks sand/dust from scratching engine surfaces. It also resists corrosion from rainwater mixed with road salts, protecting the engine long-term.

3.Aging Vehicle Maintenance

Great for cars over 5 years old with aging engine components. The Front Engine Cover shields old hoses, sensors, and wiring from external impacts (e.g., accidental tool bumps during maintenance) and reduces heat damage to brittle plastic parts. It restores a tidy engine bay look while extending the life of aging engine accessories.

4.Long-Distance Highway Driving

Essential for highway trips with hours of continuous engine operation. It blocks 60% of engine radiant heat, keeping the hood surface 15-20°C cooler (preventing hood paint fading) and reducing heat-related fatigue on nearby plastic parts. The noise-insulating layer also lowers engine hum, making long drives more comfortable.

5.Engine Bay Modification & Tidying

Suitable for users who customize their engine bays (e.g., adding LED lights, replacing hoses). The Front Engine Cover hides messy wiring or aftermarket parts, creating a clean, professional look. It also protects modified components from dust and accidental scratches, ensuring both aesthetics and functionality.

6.Extreme Temperature Climates

Reliable in freezing winters (-30°C) and hot summers (120°C). Its ABS+PP material won’t crack in low temps or deform in high heat, maintaining full protection year-round. In snowy areas, it prevents snowmelt from dripping directly onto the engine, avoiding sudden temperature shocks to engine parts.

Product Operate Guide

After the vehicle is turned off and cooled down, open the hood and clean the dust and oil stains from the engine compartment installation position; Align the Front Engine Cover with the engine compartment bracket holes and manually tighten the fixing bolts.

Use a wrench to tighten the bolts in sequence with a torque of 15-20N · m (to avoid damage caused by over tightening), and check that the cover plate fits the cabin without any gaps; Close the engine hood, lightly press the cover to confirm there is no shaking, and the installation is complete.

FAQ

Q1: Are you manufacturing company?

A: Yes. We are factory, located in Guangzhou. Our factory has certificate of lATF 16949.

Q2: What are your main products?

A: We have steering rack ,steering pump ,wheel hub and bearing ,drive shaft ,alternator,control arm and so on.

Q3: What is the lead time?

A: lt takes 3-7 days when stock is available, and 15-40 days when out of stock.

Q4: What is the warranty?

A: Our guarantee period is 60,000 kilometers or 1 year.

Q5: Do you have samples?

A: Yes, we have samples available. For bulk orders, please inquiry us for more details.