Product Introduction
1014001962 Premium High-Strength Corrosion-resistant Inner Ball Joint for Geely Freedom Car
Our 1014001962 Inner Ball Joint is a premium aftermarket component, developed with 15+ years of auto parts engineering experience. It serves as a critical link between suspension and steering systems, enabling smooth, precise vehicle control and reducing steering play.
Manufactured to ISO/TS 16949 standards, it boasts a load-bearing capacity of ≥800kg and a wear rate 30% lower than generic alternatives. Crafted from high-strength, corrosion-resistant alloy, it maintains stability in extreme temperatures (-40℃ to 120℃), ensuring long-term reliability for daily use.
Product Advantage
1. ISO/TS 16949 Certified Manufacturing for Uncompromised Precision
This ISO/TS 16949 certified inner ball joint adheres to global automotive quality standards, a benchmark we’ve maintained for over a decade. Our production process uses CNC machining with a dimensional accuracy of ±0.02mm, ensuring perfect fit with original suspension systems. Every unit undergoes 3 rounds of pre-delivery inspections, resulting in a defect rate of less than 0.1%—far below the industry average of 0.5%.
2. High-Strength Alloy Material for Extreme Durability
Crafted from heat-treated 40Cr alloy (a high-strength material widely used in heavy-duty auto parts), this high-strength inner ball joint boasts a tensile strength of 900MPa. It resists wear even in harsh conditions: after 50,000km of simulated road testing, its wear rate is 35% lower than generic steel alternatives. Additionally, it passes 1000-hour salt spray testing, making it corrosion-resistant for use in coastal or high-humidity areas.
3. Enhanced Load-Bearing Capacity for Safe Steering
As a critical component linking steering and suspension, this inner ball joint supports a maximum load of ≥850kg—exceeding the industry standard of 750kg. Its precision-machined ball stud and socket ensure smooth rotation with minimal play (≤0.5mm), reducing steering vibration and improving driving stability. This design has been validated by third-party labs, with test results showing it maintains performance even under sudden load changes.
4. Sealed Dust-Proof Design to Extend Service Life
Equipped with a double-lip nitrile rubber seal (resistant to oil and high temperatures), this inner ball joint effectively blocks dust, sand, and moisture from entering the joint. Compared to open-type or single-seal alternatives, this design extends the product’s service life by 50%—from an average of 2 years to 3 years. The seal also retains lubricant longer, eliminating the need for frequent maintenance and reducing overall ownership costs.
5. Universal Compatibility & Hassle-Free Installation
Designed with a standard interface, this inner ball joint ensures easy installation for aftermarket replacement—no modifications to the vehicle’s suspension or steering system are required. Our engineering team has optimized the bolt hole positioning, matching the original part’s fitment perfectly. Installation time is reduced by 20% compared to non-standard alternatives, as verified by professional mechanics in field tests.
Technical Parameters
| Parameter Category | Parameter Item | Specification / Data | Remarks / Certification |
| Basic Information | Product Model | 1014001962 | Unique SKU for accurate aftermarket matching |
| Product Type | Inner Ball Joint | For suspension & steering system connection |
| Application Field | Aftermarket automotive suspension & steering systems | Compatible with mainstream passenger vehicle platforms |
| Material Specifications | Main Body Material | 40Cr Alloy Steel | Heat-treated; SGS material certification (No. SG23-AP0876) |
| Ball Stud Material | 50CrV4 Alloy Steel | High tensile strength; quenched & tempered |
| Seal Material | Nitrile Rubber (NBR) | Oil-resistant, temperature-resistant |
| Coating Type | Electrophoretic Coating | Thickness: 8-12μm; corrosion-resistant |
| Performance Parameters | Rated Load-Bearing Capacity | ≥850 kg | Exceeds industry average (750kg) by 13% |
| Maximum Steering Angle | ±35° | No abnormal noise or stuck during full-angle rotation |
| Allowable Wear Amount | ≤0.03mm / 10,000km | Tested under ISO 18798-2 standard |
Operating Temperature Range
| -40℃ ~ +120℃ | Stable performance in extreme cold/hot environments |
| Rotational Resistance | 5N·m ~ 12N·m | Measured at 25℃ room temperature |
| Dimensional Parameters | Main Body Diameter
| 38mm ±0.02mm | CNC-machined for high precision |
| Ball Stud Length | 65mm ±0.05mm | Matches original part fitment standards |
| Mounting Hole Spacing | 52mm ±0.1mm | Ensures direct replacement without modification |
| Thread Specification | M12×1.5 | Standard metric thread for easy installation |
Certification & Standards
| Quality Certification | ISO/TS 16949, CE, RoHS | Annual audit passed; certificate available on request |
| Production Standard | IATF 16949:2016 | Aligns with global automotive manufacturing norms |
| Testing Data | Salt Spray Test Result | ≥1000 hours (no red rust) | Conducted per ASTM B117 standard |
| Fatigue Life Test | ≥300,000 cycles (no failure) | Tested at 1.2× rated load |
| Vibration Test Result | No looseness after 200 hours (10-2000Hz) | Complies with ISO 10816-3 standard |
Product Uses
Here are specific application scenarios of Ball Joint:
1. Daily Urban Commuting
Ideal for vehicles used in daily city travel, where frequent steering (e.g., intersections, parking) demands stable joint performance. Through 50,000km simulated urban road testing, it maintained a wear rate of less than 15%—half the industry average for generic inner ball joints. Its smooth rotation (rotational resistance: 5-12N·m) eliminates steering jitter, enhancing driving comfort for daily users.
2. Complex Road Conditions (Rural/Mountainous Areas)
Excels in areas with uneven roads, potholes, or gravel. It withstands repeated impact: third-party tests show it retains 90% of load-bearing capacity (≥765kg) after 1,000 cycles of 50mm pothole impacts. The high-strength 40Cr alloy body resists deformation, ensuring consistent steering control even on rough terrain—critical for safe travel in non-urban areas.
3. Extreme Climate Environments
Reliable in both frigid (-40℃) and high-temperature (+120℃) regions. In -40℃ low-temperature tests, its steering angle (±35°) remained unchanged, with no stiffness or seizing. For coastal/humid areas, the electrophoretic coating and nitrile rubber seal passed 1,000-hour salt spray testing (ASTM B117), preventing corrosion and extending service life by 50% vs. uncoated alternatives.
4. High-Frequency Commercial Use (Taxis/Rideshare)
Designed for vehicles with high annual mileage (20,000+ km/year). Its fatigue life test reached 300,000 cycles (1.2× rated load) without failure—equivalent to 3+ years of commercial use. The sealed design reduces maintenance needs: taxi fleets in pilot tests reported 40% fewer replacement cycles vs. standard inner ball joints, cutting operational costs.
5. Aftermarket Repair & Replacement
A go-to choice for professional repair shops and DIY users. With 99.8% fitment accuracy (matching original mounting specs), it requires no suspension/steering modifications. Mechanics confirm installation time is reduced by 20% (vs. non-standard parts), while our ISO/TS 16949 certification ensures it meets OE-level quality for reliable aftermarket replacement.
Product Operate Guide
Prep tools: Use torque wrenches (accuracy ±2%) and standard socket sets to avoid part damage.
Check fitment: Verify the part matches your vehicle’s suspension specs—our 99.8% fitment accuracy ensures compatibility.
Tighten to 25-30 N·m (per IATF 16949 torque standards); over-tightening may crack the body.
Post-install test: Confirm smooth steering (±35° angle, no jitter) to ensure safety.
