loading
| Availability: | |
|---|---|
| Quantity: | |
1061001403
HongPro
1061001403
Ensure optimal stopping power and driving safety with our premium Right Front Brake Caliper, engineered for Geely vehicles. This critical safety component is a direct OEM replacement, guaranteeing a perfect fit and seamless integration with your vehicle's existing braking system.
Constructed from high-grade materials, this caliper is built for durability and resistance to extreme heat and corrosion. It houses the brake pads and uses hydraulic pressure to clamp them against the rotor, effectively converting kinetic energy into thermal energy to slow and stop your vehicle. Each unit undergoes rigorous performance testing to meet or exceed industry standards, ensuring reliable performance, consistent braking force, and enhanced safety on the road. Always pair with high-quality brake pads and brake fluid for optimal system performance.
Our brake calipers are engineered to withstand harsh environmental challenges. The housing undergoes a multi-stage electrophoretic coating process, followed by a powder-coated finish. This creates a protective barrier that significantly outperforms standard coatings, resisting road salt, moisture, and debris. In rigorous salt spray testing (exceeding 240 hours), our calipers show zero signs of red rust. This advanced corrosion protection ensures consistent performance and extends the service life of the caliper, providing long-term reliability and value.
We eliminate the hassle of incompatible parts. This right front brake caliper is manufactured to exact OEM specifications, ensuring a direct-fit replacement for Geely vehicles. Our precision casting and machining processes guarantee that every mounting point, fluid port, and bleeder screw valve aligns perfectly with your vehicle's original setup. This commitment to dimensional accuracy, with tolerances within 0.2mm, means you can install with confidence, saving valuable time and avoiding installation headaches.
Braking generates intense heat, which can lead to brake fade. Our caliper is constructed from a high-grade, high-thermal-conductivity alloy that dissipates heat more efficiently than standard cast iron units. This design, combined with optimized piston seals rated for continuous operation at over 300°F (150°C), prevents performance degradation under high-stress conditions. The result is firm, consistent brake pedal feel and reliable stopping power, whether in city traffic or on demanding routes.
Trust is built on proven performance. Every caliper in our production line is subjected to a 100% functional test, where it is pressurized to 2,500 PSI to check for leaks and verify piston movement. Furthermore, statistical process control on our production line ensures that 99.8% of our units pass all quality checks before shipment. This data-driven approach to manufacturing guarantees a reliable and durable brake caliper that meets the stringent safety demands of modern driving.
| Specification Category | Details |
| Part Type | Right Front Brake Caliper (Includes Mounting Hardware) |
| Compatibility | Geely Vehicles (Designed to OEM specifications for a direct fit) |
| Caliper Body Material | High-Grade Gray Cast Iron (GG-25 Equivalent) |
| Piston Material | High-Strength Steel with Anti-Corrosion Coating |
| Piston Diameter | 57.2 mm (Precision-machined to ±0.1mm tolerance) |
| Surface Finish | Multi-Layer Electrophoretic Coating + Powder Coat Top Layer |
| Corrosion Resistance | Salt Spray Test Rating: > 240 hours (Red Rust) per ASTM B117 |
| Temperature Range | Seals rated for continuous operation from -40°F to +400°F (-40°C to +204°C) |
| Fluid Compatibility | DOT 3, DOT 4, and DOT 5.1 Brake Fluids |
| Pressure Rating | Functionally tested at 2,500 PSI (172 Bar) for integrity |
| Bleeder Screw Torque | 90 - 110 in-lbs (10 - 12 Nm) |
| Mounting Bolt Torque | 80 - 100 ft-lbs (108 - 135 Nm) |
| Weight | Approximately 5.2 kg (11.5 lbs) - varies slightly by application |
Here are specific application scenarios of brake caliper:
During standard brake service intervals (typically between 40,000 to 60,000 miles, but varies by driving habit), the caliper should be inspected for wear. If the caliper piston boots are cracked, the piston shows signs of seizing, or the slide pins are corroded and no longer move freely, replacement is crucial. Our caliper restores the entire clamping mechanism, ensuring smooth operation and preventing uneven pad wear, which is a common issue with aged or failing units.
Replace the caliper immediately if you experience symptoms like the vehicle pulling to one side during braking, a stuck brake that causes dragging and overheating, or a noticeable loss of braking efficiency. These issues often indicate a seized piston or internal corrosion within the caliper bore. Installing our reliable unit eliminates these safety hazards, restoring balanced and predictable braking performance to ensure driver and passenger safety.
When performing a comprehensive brake system overhaul—such as replacing rotors and pads—installing a new caliper is a proactive measure for optimal results. A worn caliper can apply uneven pressure, causing new rotors to warp prematurely and new pads to wear irregularly. Our high-performance caliper guarantees even clamping force across the entire pad surface, protecting your investment in other new components and delivering a like-new, firm brake pedal feel.
In the event of a front-end collision or impact that damages the braking system, this OEM-specification caliper is the correct part for professional repairs. It is engineered to integrate seamlessly with the vehicle's ABS and hydraulic systems. Using this precision-fit component ensures the repaired vehicle's braking system operates exactly as the manufacturer intended, which is non-negotiable for post-accident safety certification and reliable long-term function.
For your safety, always consult the vehicle's service manual before starting. We recommend a professional mechanic perform the installation. Begin by securely lifting the vehicle and removing the wheel. Clean the mounting area thoroughly before fitting our direct-replacement caliper. Use new, high-quality brake fluid and always bleed the brake system completely to remove air, ensuring a firm pedal. Adhere to the specified torque values (80-100 ft-lbs for mounting bolts) to guarantee proper function. Test the vehicle at low speeds first to confirm correct operation before normal driving.
