Product Introduction
1105103-P00 Multi-layer Bench-testing OE-matched Fuel Filter for Great Wall Motor
Engineered to optimize engine health, this fuel filter delivers precision contamination control, removing 99.8% of particles ≥4 microns via its multi-layer synthetic media—extending fuel pump and injector lifespan by up to 30%. Validated against ISO 4548-12 benchmarks, it withstands 1,500+ hours of high-pressure bench testing, ensuring durability up to 120,000 km. Leveraging 18 years of OE-matching R&D, it serves global aftermarket demand with consistent performance, reducing fuel system deposits by 45% vs. generic filters. Trusted by repair networks worldwide, it balances efficiency with cost-effective protection for diverse vehicle platforms.
Product Advantage
1. Unrivaled Precision Filtration with Multi-Layer Media
Our filter uses a proprietary multi-layer synthetic core, engineered to capture 99.8% of contaminants ≥4 microns—4.8 percentage points better than standard filters. Validated to ISO 4548-12, it blocks particles that cause injector clogging or pump wear. Field data from 8,000+ installs confirms 28% fewer fuel system issues vs. generic options—ideal for workshops prioritizing long-term component health.
2. Durable Construction for Extended Component Life
Built to survive 1,500+ hours of 6-bar high-pressure testing (equivalent to 120,000 km), this filter resists corrosion and leaks. Its zinc-plated steel housing and silicone gasket maintain integrity in extreme conditions, cutting fuel pump wear by 30% vs. low-quality alternatives. For installers, this means fewer comebacks and trusted recommendations.
3. 45% Less Deposit Build-Up for Peak Performance
Independent labs show our filter reduces sludge/varnish deposits by 45% over generic filters—thanks to its high-efficiency media that traps contaminants early. This minimizes costly injector cleanings and ensures optimal fuel flow/MPG. Backed by OE R&D, it’s a smart pick for preventative maintenance-focused businesses.
4. OE-Engineered for Flawless Aftermarket Fitment
Leveraging 18 years of OE manufacturing experience, this filter replicates factory specs—enabling tool-less installation and compatibility with common applications. Our QC team cross-checks each unit against OEM tolerances, eliminating fitment guesswork. Trusted by 500+ global repair chains, it’s the go-to for brand-aligned reliability.
5. Globally Certified for Safety & Peace of Mind
Certified to ISO 9001 and compliant with EN 590/ASTM D975 fuel standards, this filter meets rigorous safety benchmarks. Zero fuel leaks/failures in 10,000+ installs—giving distributors and customers confidence in a low-risk, high-demand product. Perfect for growing your portfolio with a proven, trusted solution.
Technical Parameters
| Parameter Category | Specification | Authority/Data Source |
| Filtration Media | 3-layer synthetic fiber composite; micron rating: 4μm absolute; filtration efficiency: 99.8% at ≥4μm. | Tested per ISO 4548-12 (fuel filter performance). |
| Pressure Performance | Operating pressure: 1–6 bar; burst pressure: ≥12 bar; flow rate: ≥25 L/h @ 3 bar. | Bench-tested with 100+ engine fuel systems. |
| Material Construction | Housing: zinc-plated steel (corrosion-resistant); gasket: nitrile silicone (fuel-compatible); end caps: polypropylene (heat-stable up to 120°C). | Material certifications: RoHS, REACH. |
| Dimensional Accuracy | Diameter: 65mm; height: 110mm; thread size: M20×1.5 (length: 50mm); O-ring ID: 28mm. | Dimensional tolerance: ±0.1mm (ISO 2768-mH). |
| Durability Testing | Withstands 1,500+ hours of cyclic pressure testing (0–6 bar); resistance to ethanol-blended fuels (E10–E85). | Validated by TÜV SÜD for 120,000 km equivalent life. |
| Contaminant Retention | Holds up to 50g of contaminants before replacement; prevents particle migration to fuel injectors/pump. | Lab analysis via particle counting (ISO 16232-9). |
Product Uses
Here are specific application scenarios of Air filter:
1. Professional Repair Workshops
Trusted by 500+ global workshops, this filter slashes repeat repairs by 30%—its 99.8% 4μm filtration efficiency catches injector-clogging particles before they cause callbacks. ISO 4548-12-certified, it delivers consistent performance, letting techs prioritize efficient service over rework. Ideal for shops focused on customer retention and reducing warranty claims.
2. Aftermarket Distributors
With compatibility matching 80% of common fuel systems, this filter boosts distributor inventory turnover by 25%. Backed by TÜV SÜD validation for 120,000 km lifespan, it minimizes return rates and builds trust with retail buyers. A go-to for distributors targeting high-demand, low-risk aftermarket segments.
3. High-Mileage Fleet Operators
For taxi or logistics fleets, this filter cuts annual maintenance costs by $200/vehicle—its 120,000 km durability reduces downtime. Resistance to E10-E85 ethanol blends prevents failures in diverse markets. Trusted by 100+ fleet managers for reliable, cost-effective fuel system protection.
4. Ethanol-Rich Fuel Regions
Designed for markets like Brazil or the U.S. Midwest, this filter withstands 500+ hours of ethanol exposure (tested by TÜV)—unlike generic options that degrade. Ensures stable fuel flow and protects injectors in high-ethanol environments, where contamination risks are higher.
5. Preventative Maintenance (PM) Programs
Integrated into 300+ commercial PM plans, this filter’s 4μm precision traps contaminants early—reducing major fuel system failures by 50%. Lab data (ISO 16232-9) shows it holds 50g of debris before replacement, preventing costly pump/injector damage for proactive providers.
Product Operate Guide
For optimal safety and performance: 1) Inspect the filter for dents/cracks—our TÜV-certified zinc-plated housing resists leaks. 2) Tighten the mounting nut to 15Nm (ISO 2768 standard) to avoid damage. 3) Replace every 120,000 km/24 months—field data cuts fuel pump wear by 30%. 4) Recycle per local rules; RoHS-compliant materials keep waste safe. Simple steps for long-lasting fuel system protection.
