Product Introduction
1109101-S16 Automotive High-efficiency Superior Air Filter for Great Wall Motor
Engineered for superior engine defense, this filter delivers 99.6%+ particulate capture—surpassing ISO 5011 global filtration standards. Leveraging 12 years of automotive aftermarket expertise and data from 400k+ vehicle service logs, its multi-layer synthetic media blocks dust, pollen, and fine debris while preserving airflow. Tested to -40°C to 85°C extremes, it reduces engine wear by up to 18% (per fleet trials) and optimizes fuel efficiency. Trusted by commercial fleets and DIY enthusiasts alike for reliable, long-term performance that keeps engines running smoothly.
Product Advantage
1. ISO 5011-Certified Superior Filtration
Exceeds global standards with 99.7% particulate capture for particles as small as 5 microns—4% better than ISO 5011’s baseline. Tested by SAE-certified labs, it blocks dust, pollen, and road debris that cause abrasive engine wear. Fleet data from 200k+ miles confirms it cuts maintenance costs by 12% vs. generic filters, keeping engines running cleaner longer.
2. Low-Pressure-Drop Synthetic Media
Our proprietary multi-layer synthetic fiber blend traps contaminants whilemaintaining 15% lower airflow resistance than paper filters. This balances protection with performance: independent tests show it preserves throttle response and improves fuel efficiency by 3–5%. It lasts 25% longer (up to 18k miles) before needing replacement—reducing downtime.
3. Extreme-Temperature Durability
Built with a heat-resistant thermoplastic housing and silicone gaskets, it withstands -40°C to 85°C without warping or cracking. Fleet trials in harsh climates (deserts/frozen tundras) reveal a 20% reduction in seal-related failures vs. standard filters. This ensures consistent, reliable filtration where others fail.
4. Zero-Bypass Sealing Technology
A dual-lip rubber gasket and contoured design create an airtight seal against the intake manifold. Third-party testing shows <0.1% leakage rate—far below industry averages—eliminating unfiltered air bypass. This prevents dirt from reaching engine components, a top cause of premature wear in competitive filters.
5. Real-World Validated Reliability
Before launch, we ran 12 weeks of fleet testing with 50+ commercial vehicles (500k+ miles). Results: 15% less engine particulate buildup and 10% better fuel economy—metrics aligned with SAE J726 standards. Backed by a 12-month warranty, we stand behind its performance in daily driving and heavy use.
Technical Parameters
| Parameter | Specification | Validation/Test Standard |
Filtration Efficiency
| ≥99.7% for particles ≥5μm (dust, pollen, road debris) | Exceeds ISO 5011:2010 baseline by 2%; SAE-certified lab tested. |
| Media Material | Proprietary multi-layer synthetic fiber blend | Outperforms paper media by 30% in moisture/oil resistance; resists tearing. |
| Dimensions | 230mm (L) × 150mm (W) × 45mm (H) | Precision-molded to OEM fitment (±0.5mm tolerance); direct replacement. |
| Operating Temperature | -40°C to 85°C | Tested in desert/arctic fleets; no warping/cracking or seal failure. |
| Pressure Drop | ≤1.2 kPa @ 20 m/s airflow | Maintains 15% lower resistance than standard paper filters; optimizes engine airflow.
|
| Service Life | Up to 18,000 miles / 12 months | Validated via 50+ commercial fleets (500k+ miles); 12% fewer engine-related breakdowns vs. generics. |
| Sealing Performance | <0.1% bypass rate | Dual-lip rubber gasket + contoured housing; eliminates unfiltered air intake (third-party tested). |
| Certifications | ISO 5011:2010, SAE J726, RoHS Compliant | Aligns with global automotive aftermarket safety & performance rules. |
Product Uses
Here are specific application scenarios of Air filter:
1. Daily Commuting in Urban Areas
Ideal for vehicles driven in cities with high levels of dust, pollen, and exhaust particulates. Our filter captures 99.7% of particles ≥5μm (exceeding ISO 5011 by 2%), reducing engine wear from abrasive debris. Data from 400k+ service logs shows it cuts routine maintenance costs by 12% vs. generic filters—perfect for drivers prioritizing long-term engine health and lower upkeep.
2. Long-Haul Trucking & Highway Use
Built for vehicles covering 10k+ miles monthly. Its low-pressure-drop synthetic media maintains 15% less airflow resistance, preserving throttle response and boosting fuel efficiency by 3–5% (per SAE-tested trials). With an 18k-mile service life, it minimizes roadside replacements—critical for fleet operators reducing downtime and maximizing productivity.
3. Extreme Climate Operations (Desert/Arctic)
Suited for vehicles in harsh environments: the thermoplastic housing and silicone gaskets withstand -40°C to 85°C without warping. Fleet tests in deserts/arctic zones revealed a 20% reduction in seal-related failures vs. standard filters—ensuring consistent, reliable filtration where temperature swings compromise lesser parts.
4. High-Dust Environments (Construction/Site Vehicles)
Tailored for vehicles operating in mud, dirt, or unpaved roads. The multi-layer synthetic media blocks fine particulates that cause engine carbon buildup—data from construction fleets shows 15% less deposits over 10k miles. This prevents premature wear and costly repairs, keeping site vehicles running efficiently.
5. Commercial Fleet Maintenance Programs
A staple for businesses managing 10+ vehicles. In 12-week fleet trials (50+ vehicles, 500k+ miles), it reduced engine particulate buildup by 15% and cut fuel costs by 10%. Backed by a 12-month warranty, it lowers total cost of ownership—aligning with fleet managers’ goals of reliability and budget control.
Product Operate Guide
For peak performance: 1) Inspect your old filter—replace if dirty/torn (common after 10k–15k miles) to avoid debris damage. 2) Align our filter’s precision edges (±0.5mm tolerance) with the intake housing; press firmly for a leak-tight seal (<0.1% bypass, third-party tested). 3) Enjoy smoother acceleration (15% lower pressure drop) and cleaner air—thanks to 99.7% filtration. Replace every 12mo/18k miles; our warranty guarantees reliability.
