Product Introduction
1109102-K00 High-efficiency OEM-comparable Cost-effective Air Filter for Great Wall Motor
Crafted for precision engine protection, this high-performance air filter (part #1109102-K00) uses ISO 5011-certified multi-layer media to trap 99.8% of airborne contaminants—dust, pollen, and road debris—preventing abrasive wear. Backed by 5+ years of OEM-aligned R&D, it maintains optimal airflow while outperforming generic filters: third-party trials show up to 15% longer engine life. Trusted by professionals for consistent, durable defense—ensuring your engine runs cleaner, cooler, and more efficiently. A cost-effective solution for long-term reliability.
Product Advantage
1. ISO 5011-Certified Superior Filtration (99.8% Contaminant Capture)
Our filter uses a multi-layer cellulose-paper media (certified to ISO 5011, the industry’s gold standard for air filtration) to trap 99.8% of particles as small as 5 microns—dust, pollen, sand, and road soot. This exceeds generic filters’ average capture rate by 20% (per SAE J726 testing), shielding engine components from abrasive wear. Ideal for high-dust environments, it ensures consistent, reliable protection that OEMs trust.
2. Durable Synthetic-Cellulose Blend for Extreme Conditions
Crafted with a moisture-resistant, tear-proof composite, this filter withstands -40°C to 120°C temperatures and resists collapse under high airflow pressure—3x longer than standard paper filters (third-party tested). No delamination or fiber shedding means zero risk of contaminants bypassing the filter. Built to last, it cuts replacement frequency and downtime.
3. Optimized Pleat Design for Max Airflow & Efficiency
Engineered with a fluted, high-pleat structure, our filter balances superior filtration with minimal air restriction. It maintains a 15% lower pressure drop than competing filters (measured via ISO 5011 flow tests), allowing more clean air into the engine. This boosts combustion efficiency, reduces fuel consumption, and supports consistent power—even under heavy loads.
4. IATF 16949-Compliant Quality Control
Every unit undergoes 12-step QC checks, including helium leak testing (to detect micro-tears) and weight verification (to ensure media density). Our factory adheres to IATF 16949 standards, eliminating variability. You get a uniform, defect-free product—backed by a 12-month warranty against manufacturing flaws.
5. Cost-Effective Long-Term Engine Protection
While competitively priced, this filter delivers 18% fewer engine-related repairs over 200,000 km (fleet trial data). By preventing dust-induced damage, it lowers maintenance costs and extends engine life. It’s not just a filter—it’s an investment in lower total cost of ownership (TCO) for your customers.
Technical Parameters
| Parameter | Specification |
| Dimensions (L x Dia.) | 265mm x 110mm (10.4" x 4.3") – Precision-engineered to match OEM mounting points. |
| Filter Media | Multi-layer cellulose-synthetic blend – ISO 5011-certified for consistent performance. |
| Filtration Efficiency | ≥99.8% @ 5μm particle size – Exceeds SAE J726 industry standard by 20% vs. generic filters. |
| Dust Holding Capacity | ≥25g – Tested per SAE J726; supports extended service life in high-dust environments. |
| Max Operating Temp | -40°C to 120°C (-40°F to 248°F) – Withstands extreme climates without media degradation. |
| Max Pressure Drop | ≤3.5 kPa @ 800 m³/h airflow – Minimizes engine load while maintaining optimal ventilation. |
| Frame Material | ABS plastic with epoxy coating – Resistant to moisture, cracks, and UV damage. |
| Gasket Material | Nitrile rubber – Seals tight against housings to prevent unfiltered air bypass. |
| Certifications | ISO 5011 (filtration), IATF 16949 (quality), RoHS (compliant for EU markets). |
| Service Life | Up to 20,000 km or 12 months – Validated via fleet trials with 95% retention of initial efficiency. |
Product Uses
Here are specific application scenarios of Air filter:
1. High-Dust Job Sites (Construction, Mining, Unpaved Roads)
Ideal for vehicles navigating dusty environments—this filter traps 99.8% of 5μm particles (SAE J726-certified) and holds up to 25g of dust before clogging. Fleet trials show it reduces engine wear by 18% in such settings, cutting breakdowns and extending component life. Perfect for crews working on sites with constant debris.
2. Extreme Climate Zones (Arctic Winters, Desert Summers)
Withstands -40°C to 120°C (-40°F to 248°F), maintaining filtration efficiency and shape in harsh extremes. In Nordic winters, it resists brittleness; in Middle Eastern deserts, it prevents moisture absorption. No cracking or delamination—reliable protection for year-round operation.
3. Commercial Fleets & Heavy-Duty Use
Designed for frequent long-hauls: lasts up to 20,000 km/12 months (fleet-validated with 95% initial efficiency retention). Reduces replacement stops by 25% vs. generics, lowering downtime for businesses running daily routes or off-road jobs.
4. Urban Commuting & Stop-and-Go Traffic
Balances superior filtration with low airflow restriction—15% lower pressure drop than competitors (ISO 5011). Improves fuel economy by up to 3% in cities, ideal for drivers prioritizing clean air and consistent performance.
5. Compliance-Driven Markets (EU, North America)
Meets RoHS (lead-free) and IATF 16949 standards, simplifying entry into strict regulatory regions. No re-testing needed—buyers trust it to align with local emissions and environmental rules.
Product Operate Guide
For peak performance: 1) Inspect the old filter—replace if it holds >25g dust (SAE J726-tested). 2) Align the new filter’s nitrile gasket with the housing, pressing firmly to seal (prevents unfiltered air bypass). 3) Replace every 20,000km/12 months (fleet-validated) to retain 99.8% filtration efficiency (ISO 5011-certified). Follow these to safeguard your engine and extend service life—backed by our IATF 16949 quality standards.
