Product Introduction
1407042180 Precise Long-lasting OE-compliant Brake Cable for Geely CK
Our premium brake cable is a core component for reliable passenger vehicle braking systems, engineered to enable precise, consistent force transmission between brake pedals and actuators—critical for driving safety.
Backed by 18+ years of automotive parts expertise, it adheres to IATF 16949 and ISO 9001 standards, withstanding 12,000+ cyclic brake tests without performance loss. Made of high-tensile steel with a corrosion-resistant zinc-plated coating, it offers a service life of up to 85,000 km. Each unit passes 3-stage pre-shipment inspections, ensuring long-term durability and stable braking performance.
Product Advantage
Authoritative Certification & Strict Quality Control
Backed by 18+ years of expertise in automotive brake components, our brake cable fully complies with IATF 16949 and ISO 9001 quality management systems. Each unit undergoes 12,000+ cyclic brake tests (simulating long-term road use) and a 3-stage pre-shipment inspection (dimensional check, tension test, corrosion resistance test), achieving a 99.8% qualified rate to ensure consistent safety performance.
High-Tensile Material & Corrosion-Resistant Design
The core of the brake cable is made of high-tensile carbon steel (tensile strength up to 1200MPa), which resists deformation even under sudden heavy braking. The outer layer is coated with zinc-nickel alloy (thickness ≥ 8μm), passing 500+ hours of neutral salt spray testing—effectively preventing rust and corrosion caused by rain, snow, or road chemicals, extending the service life to 85,000+ km.
Precise Force Transmission & No Delay
We adopt a precision stranding process (strand pitch error ≤ 0.1mm) and a smooth inner sheath (low friction coefficient ≤ 0.15), ensuring that the brake force is transmitted from the pedal to the actuator with over 98% efficiency. There is no lag or slack during braking, which is crucial for avoiding potential safety hazards caused by delayed braking response.
Wide Environmental Adaptability
Our brake cable is designed to withstand extreme temperatures (from -40℃ to 120℃) and high humidity environments (relative humidity ≥ 95%). It maintains stable performance in cold winter regions (preventing sheath hardening) and hot summer areas (avoiding material softening), making it suitable for various climate conditions worldwide—ideal for global aftermarket sales of automotive brake parts.
Easy Installation & Perfect Compatibility
The brake cable is manufactured with strict dimensional tolerance control (length error ≤ ±2mm, end fitting precision ≤ 0.05mm), matching the original installation interface perfectly. It requires no additional modifications during installation, reducing the time for repair shops or users to replace parts. This compatibility and ease of use make it a preferred choice for automotive aftermarket distributors.
Technical Parameters
| Parameter Category | Specific Item | Technical Specification |
| Core Material | Cable Core Material | High-tensile carbon steel (SCM435), tensile strength ≥ 1200MPa |
| Coating Type | Zinc-nickel alloy coating, thickness ≥ 8μm, adhesion grade ≥ 4B (per ISO 2409) |
| Sheath Material | Reinforced PA66 + 30% glass fiber, wear resistance ≤ 0.005g/cm² (per ASTM D4060) |
| Performance Index | Cyclic Brake Test | ≥ 12,000 cycles without performance degradation (simulating 85,000km road use) |
| Force Transmission Efficiency | ≥ 98% (no lag during emergency braking, response time ≤ 0.3s) |
| Tensile Breaking Load | ≥ 28kN (exceeds IATF 16949 minimum requirement by 35%) |
| Dimensional Tolerance | Overall Length Error | ± 2mm (per ISO 8015 geometric dimensioning standard) |
| End Fitting Precision | ≤ 0.05mm (matching original installation interface, no modification needed) |
| Cable Diameter | 6.0mm ± 0.1mm (uniform cross-section, no eccentricity) |
| Environmental Adaptability | Operating Temperature Range | -40℃ to 120℃ (stable performance in extreme cold/hot climates) |
| Salt Spray Resistance | ≥ 500 hours (neutral salt spray test, no red rust, per ASTM B117) |
| Humidity Resistance | ≥ 95% relative humidity (48-hour test, no sheath deformation) |
| Quality Certification | Management System | IATF 16949:2016, ISO 9001:2015 |
| Pre-Shipment Inspection | 3-stage testing (dimensional check, tension test, corrosion test), qualification rate ≥ 99.8% |
| Service Life | Expected Service Life | ≥ 85,000km under normal use conditions (based on third-party durability testing) |
Product Uses
Here are specific application scenarios of Brake Cable:
Aftermarket Auto Repair Shops
Ideal for independent repair shops and chain service centers. With 99.8% dimensional matching accuracy (per ISO 8015), it fits seamlessly during replacement, reducing repair rework rate to below 1.2%. Compliant with IATF 16949, it meets customers’ demand for reliable aftermarket brake parts, enhancing shop credibility.
Commercial Fleet Maintenance
Perfect for logistics fleets, rental car companies, and public transport vehicles. Its 85,000+ km service life (tested by third-party labs) extends replacement intervals by 30% compared to ordinary cables, cutting fleet downtime and maintenance costs. Stable performance under frequent braking (12,000+ cyclic tests passed) ensures operational safety.
Automotive Modification Market
Suitable for brake system upgrades. With 1200MPa tensile strength and smooth force transmission (≥98% efficiency), it matches over 95% of mainstream modified brake calipers. The zinc-nickel coating (500-hour salt spray resistance) prevents corrosion from modified cooling systems, ideal for performance-focused modders.
Extreme Climate Regions
Essential for areas with harsh conditions: -40℃ to 120℃ operating range maintains flexibility (no sheath hardening/softening). In coastal regions, it resists salt corrosion (ASTM B117 test passed), reducing premature failure by 45% vs. uncoated cables—trusted by distributors in high-humidity or cold zones.
Cross-Border B2B Wholesale
Tailored for overseas distributors (auto parts wholesalers). Pre-certified with ISO 9001, it simplifies customs clearance (no compliance risks). Its consistent quality (3-stage inspection) ensures low return rates (<0.5%), helping distributors optimize inventory turnover and build long-term customer trust.
Product Operate Guide
Pre-Installation Prep: Ensure the vehicle is turned off and power-disconnected. Use a torque wrench (set to 25-30 N・m, per IATF 16949 standards) and wire cutters for safe operation—avoid damaging adjacent brake lines.
Installation Steps: Remove the old cable by detaching end fittings; align the new cable’s connectors with the vehicle’s brake components, then fasten to the 25-30 N·m torque.
Post-Installation Check: Depress the brake pedal 3-5 times to expel air; verify brake free travel is 3-5mm (normal range). Test in a safe area to ensure stable braking before road use.
