Product Introduction
3502150-K00 High-Performance Noise-Reduced OE-Grade Brake Pads for Great Wall Motor
Engineered for reliability, our 3502150-K00 brake pads deliver consistent stopping power critical to driving safety. Crafted with a ceramic-composite friction material, they maintain a stable 0.38μ friction coefficient (±5%) across temperatures up to 300°C, ensuring minimal performance drop-off even under heavy braking. Tested over 100,000 km in accelerated wear trials, they outlast industry averages by 25%, reducing replacement frequency. Low-dust formulation and noise-dampening shims minimize NVH, enhancing driver comfort. Compliant with ISO 9001 standards, this part reflects our decade of OE-grade aftermarket expertise—trusted by global repair networks for durability and precision fit. Ideal for demanding fleets and discerning drivers prioritizing safety and value.
Product Advantage
1. Stable High-Performance Friction Technology
Our pads leverage a proprietary ceramic-composite friction material engineered for unwavering stopping power. With a consistent 0.38μ friction coefficient (±5%) across temperatures from -40°C to 300°C, they resist “brake fade” during heavy deceleration—critical for emergency stops. This material outperforms semi-metallic alternatives in both cold-weather responsiveness and high-heat durability, ensuring predictable control for drivers.
2. Extended Wear Life with Low Maintenance
Rigorous accelerated wear testing confirms these pads last 25% longer than industry averages—over 100,000 km in real-world use. The low-abrasion formula minimizes rotor wear by 15%, reducing costly aftermarket repairs. Our ISO 9001-certified production guarantees uniform quality, eliminating premature thinning or delamination. A cost-effective choice for fleets and individual drivers alike.
3. Low-Dust & Noise-Reduced Comfort
Designed for clean, quiet operation: a graphite-infused low-dust coating cuts wheel soiling by 40% vs. standard pads, keeping vehicles looking newer longer. Integrated noise-dampening shims absorb 90% of high-frequency squeals, lowering cabin NVH (Noise, Vibration, Harshness) by 30%. Ideal for urban drivers prioritizing comfort and curb appeal.
4. Precision OE-Grade Fit & Reliability
Manufactured to exact OEM specifications, our pads include pre-attached shims and clips for tool-free, error-free installation. Tight tolerances (±0.05mm) ensure even pressure distribution—preventing rattling or uneven wear. Backed by a decade of aftermarket expertise and a 12-month warranty, this part replicates factory performance without compromises.
Technical Parameters
| Parameter | Specification | Validation/Data |
| Friction Material Type | Proprietary Ceramic-Composite | Resists fade at high temps; outperforms semi-metallic in cold starts. |
| Coefficient of Friction (μ) | 0.38 ±5% | Stable across -40°C to 300°C (tested per SAE J2707). |
| Operating Temperature Range | -40°C to 300°C | Withstands extreme climates—from winter braking to desert highways. |
| Initial Thickness | 12.0mm | Uniform density for even pressure distribution. |
| Worn Limit | 3.0mm | Clear replacement indicator to avoid rotor damage. |
| Weight (Per Pair) | ~1.2kg | Lightweight design reduces unsprung mass for better handling. |
| Noise Level | ≤55dB(A) | Third-party NVH-certified; 90% less squeal than OEM. |
| Dust Emission | 40% Lower Than Industry Average | Graphite-infused coating minimizes wheel soiling. |
| Wear Life | 100,000+ km | Accelerated testing: Outlasts market average by 25%. |
| Compliance Standards | ISO 9001, SAE J2707 | Manufactured in an ISO-certified facility; meets safety benchmarks. |
| Warranty | 12 Months | Backed by our defect-free quality guarantee. |
Product Uses
Here are specific application scenarios of brake pad:
1. Daily Urban Commuting
Perfect for stop-and-go city driving, our pads reduce rotor wear by 15% vs. industry averages (low-abrasion ceramic composite) and keep noise below 55dB(A)—minimizing driver fatigue from squealing brakes. Tested over 100,000km, they require fewer replacements, ideal for daily drivers prioritizing comfort and low maintenance.
2. Long-Haul Highway Driving
Built for cross-country trips, the pads maintain a stable 0.38μ friction coefficient at 300°C (SAE J2707-tested), resisting brake fade during emergency stops or mountain descents. Their durability ensures consistent safety for drivers covering thousands of kilometers.
3. Frequent Braking & Light Commercial Use
Suited for hillside driving or small cargo loads, the proprietary material lasts 25% longer in high-stress scenarios—reducing rotor damage and extending service intervals. Critical for vehicles navigating challenging terrain where brake reliability is non-negotiable.
4. Extreme Climate Operations
From -40°C winters to 300°C summer heat, the ceramic composite retains grip in cold starts and resists thermal degradation. ISO 9001-certified, these pads deliver unwavering performance for drivers in harsh climates.
5. Fleet & Commercial Fleets
Designed for taxis or logistics vehicles, the pads cut downtime with a 12-month warranty and 100,000km+ lifespan. Low-dust and quiet, they lower cleaning/maintenance costs—boosting fleet efficiency and driver satisfaction.
Product Operate Guide
Before installing, confirm the part number aligns with your OE specs and inspect rotors—if grooves exceed 1mm, replace them (SAE J2707-recommended). Use a brake piston tool to retract calipers gently—never tap pads, as this damages friction material. Ensure shims/clips seat fully for even pressure. For optimal bed-in, avoid hard braking for the first 500km—letting pads and rotors mate smoothly. Backed by our 10+ years of OE-fit expertise, this maximizes safety, minimizes noise, and extends service life.
