Product Introduction
4116120-K00 Impact-Resistant Plug-and-Play Energy-Saving Fog Lamp for Great Wall Motor
With 12 years of expertise in automotive lighting, our fog lamps are tailored for precise compatibility with targeted vehicle ranges. Certified to ECE R112 and DOT standards—meeting strict global safety regulations—they match OEM-level quality for reliable performance.
Featuring an IP67 waterproof/dustproof rating, they withstand harsh weather like heavy fog, rain, or snow. The high-strength PC housing resists impact and corrosion, while the LED core delivers 50,000 hours of lifespan (30% longer than industry averages) and boosts road visibility by 150%, enhancing driving safety. A trusted pick for durability and functionality.
Product Advantage
ECE R112 & DOT Dual Certification for Global Safety Compliance
We adhere to international automotive lighting standards—each fog lamp passes ECE R112 (European) and DOT (U.S.) certifications, with a 99.8% first-time qualification rate in third-party testing. Unlike uncertified products, ours meet strict requirements for light intensity, beam pattern, and heat resistance, ensuring legal use in 80+ countries. This certification also reflects our 12-year commitment to OEM-level quality, trusted by 500+ automotive aftermarket partners.
LED Core with 50,000-Hour Lifespan & 150% Visibility Boost
Equipped with high-brightness LED chips (selected from top-tier suppliers), our fog lamp delivers 3,200 lumens of warm white light—cutting through heavy fog, rain, or snow more effectively than traditional halogen lamps. The LED core has a lifespan of 50,000 hours, which is 30% longer than the industry average (38,000 hours). Road tests show it enhances forward visibility by 150% at 50 meters, significantly reducing collision risks in low-visibility conditions.
IP67 Waterproof & Impact-Resistant PC Housing
The fog lamp’s housing is made of high-strength polycarbonate (PC) material, with a 3-layer waterproof seal that achieves IP67 rating. It can withstand 30 minutes of immersion in 1.5-meter-deep water without leakage, and resist impacts from small stones (up to 5N force) during driving. Additionally, the housing has a UV-resistant coating, preventing yellowing or cracking even after 3,000 hours of exposure to strong sunlight—solving the common problem of cheap fog lamps degrading in harsh weather.
Plug-and-Play Design for 30-Minute Easy Installation
We optimize compatibility for targeted vehicle ranges: the fog lamp’s connector matches the original vehicle’s socket perfectly, requiring no wire cutting or modification. According to user feedback, 95% of customers complete installation in less than 30 minutes with just basic tools (screwdriver, wrench). We also provide a detailed installation manual with step-by-step photos, and offer 24/7 technical support—reducing post-purchase troubles for both individual car owners and repair shops.
Energy-Saving Performance with 40% Lower Power Consumption
Compared to halogen fog lamps (which typically consume 55W), our LED fog lamp uses only 33W while delivering higher brightness. This reduces the vehicle’s battery load by 40%, avoiding excessive power drain during long-term use. It also meets global energy efficiency standards (e.g., EU ErP Directive), making it an eco-friendly choice for customers focused on both performance and sustainability.
Technical Parameters
| Parameter Category | Specific Specification | Remarks/Certification |
| Basic Information | - Product Type: LED Fog Lamp- Certification: ECE R112 (Europe), DOT FMVSS 108 (U.S.)
| Certified by TÜV Rheinland; 99.8% first-pass rate in compliance testing |
| Optical Performance | - Light Source: High-brightness SMD LED Chips- Luminous Flux: 3200 ± 200 lm- Color Temperature: 3000K - 3500K (warm white)- Beam Angle: 15° (narrow beam for long-range penetration) | Warm white light reduces glare in fog/rain; beam pattern meets ECE R112 Class B standards |
| Protection & Durability | - IP Rating: IP67 (waterproof/dustproof)- Waterproof Test: Withstands 1.5m deep water immersion for 30 mins- Impact Resistance: ≥ 5N (anti-stone impact, ISO 12233)- UV Resistance: No yellowing after 3000h xenon lamp irradiation | Solves common issues of water leakage and housing aging in harsh environments |
| Structural & Material | - Housing Material: PC + ABS alloy (heat-resistant)- Lens Material: High-transmittance PC (light transmittance ≥ 92%)- Surface Treatment: Anti-scratch coating (hardness ≥ 3H)- Weight: 180 ± 10g/piece | PC + ABS alloy resists high temperatures (up to 120℃) from LED heat |
| Electrical Specifications | - Operating Voltage: 12V DC (compatible with 10.8V - 14.4V)- Rated Power: 33W ± 2W- Operating Current: 2.75A ± 0.2A- Startup Voltage: ≤ 9.5V | 40% lower power consumption than traditional 55W halogen fog lamps |
| Service Life & Reliability | - LED Lifespan: ≥ 50,000 hours (at 25℃ ambient temperature)- Switching Cycles: ≥ 30,000 times- Operating Temperature Range: -40℃ to 85℃- Storage Temperature Range: -50℃ to 100℃ | Tested under extreme temperature cycles (100 cycles of -40℃ to 85℃) without performance loss |
| Installation | - Mounting Type: Bolt-on (matches original vehicle mounting points)- Connector Type: OEM-compatible plug- Installation Time: ≤ 30 mins (for non-professionals) | Plug-and-play design; no wire cutting or modification required |
Product Uses
Here are specific application scenarios of fog lamp:
ECE R112 & DOT Dual Certification for Global Safety
As a key advantage, our fog lamps are fully certified to ECE R112 (European) and DOT FMVSS 108 (U.S.) standards, tested and approved by TÜV Rheinland (a leading global certification body). We boast a 99.8% first-pass rate in third-party compliance tests, far above the industry average of 92%. This ensures legal use in 80+ countries, making our ECE R112 certified fog lamp a trusted choice for international buyers and 500+ automotive aftermarket partners.
LED Core Boosts Visibility by 150% with 50,000-Hour Lifespan
Our high-performance LED fog lamp uses top-tier SMD LED chips, delivering 3,200 lumens of warm white light that cuts through fog/rain 2x faster than halogen alternatives. Road tests confirm it enhances forward visibility by 150% at 50 meters—critical for low-visibility safety. The LED core also has a 50,000-hour lifespan, which is 30% longer than the industry average (38,000 hours), reducing replacement frequency and long-term costs.
IP67 Waterproof & Impact-Resistant Design for Harsh Conditions
Engineered to withstand extreme weather, our fog lamp features an IP67 waterproof rating—verified to endure 30 minutes of immersion in 1.5m-deep water without leakage. Its housing is made of PC+ABS alloy, passing ISO 12233 impact tests (resisting 5N force from small stones). A UV-resistant coating also prevents yellowing even after 3,000 hours of strong sunlight, solving the common flaw of cheap IP67 waterproof fog lamp housings degrading over time.
Plug-and-Play Installation in 30 Minutes (No Modifications)
We optimize compatibility for targeted vehicle ranges: the fog lamp’s connector matches OEM sockets exactly, requiring no wire cutting. User feedback shows 95% of customers (including non-professionals) finish installation in ≤30 minutes with basic tools. We also provide a photo-guided manual and 24/7 technical support—eliminating the hassle that often comes with aftermarket fog lamp installations.
40% Lower Power Consumption (Eco-Friendly & Battery-Safe)
Compared to traditional 55W halogen fog lamps, our model uses only 33W while delivering brighter light. This cuts power consumption by 40%, reducing strain on vehicle batteries during long drives. It also meets the EU ErP Directive (energy efficiency standard), making it a sustainable choice for buyers prioritizing both performance and eco-friendliness—aligning with global trends in automotive lighting.
Product Operate Guide
Our fog lamp operates simply, aligning with ECE R112 safety standards. After starting your vehicle, turn on the fog lamp switch (match your vehicle’s control logic). For maintenance, clean the lens with a soft cloth—avoid high-pressure water direct flushing (IP67-rated, but prevents lens scratches). It works within 10.8-14.4V DC; if dim or flickering, stop use and check the circuit. Ensure it’s only used in low visibility (fog/rain) for optimal safety.
