Product Introduction
T11-1106610DA fuel pump for Chery
B1123100 Fuel Pump ensures precise fuel delivery and stable pressure—vital for smooth engine operation. Forged with corrosion-resistant, heavy-duty components, it’s tested to sustain consistent 55 PSI output under load, eliminating performance drops. Manufactured to ISO/TS 16949 standards, our pump leverages 10+ years of automotive component expertise to minimize failures and extend service life. Designed for high-stress use, it delivers unwavering fuel flow where reliability is non-negotiable—backed by rigorous quality checks to exceed industry expectations.
Product Advantage
1. Precise Fuel Delivery for Unwavering Engine Performance
Our pump maintains a tight ±5% pressure tolerance, delivering steady 55–60 PSI output to eliminate engine hesitation or misfires—even under high load. With a brushless DC motor and precision-machined impeller, it optimizes fuel flow for smooth operation at any RPM. This OE-level control minimizes fuel waste and maximizes power, aligning with strict industry benchmarks for consistency.
2. OE-Spec Engineering for Seamless Fit & Function
With 15 years of OE component expertise, our pump mirrors factory specifications exactly—from connector alignment to thread pitch. Every unit undergoes 3D scanning and functional testing to guarantee perfect compatibility, installing like original equipment—no modifications needed. This precision avoids fitment headaches and delivers factory-grade reliability.
3. Quiet Efficiency That Boosts Your Bottom Line
An optimized impeller reduces energy consumption while increasing flow, contributing to up to 3% better real-world fuel economy. A sound-dampening housing keeps noise below 45 dB (quieter than a library whisper), ensuring a peaceful cabin. Get powerful performance without sacrificing comfort or budget—ideal for discerning users.
4. Worry-Free Ownership with Industry-Leading Support
We back our pump with a 12-month limited warranty and 24/7 technical support. Every unit includes a traceable serial number and a step-by-step install guide. Our certified tech team solves issues fast—because we’re confident in the durability we build. Invest in a pump that prioritizes your peace of mind.
Technical Parameters
| Parameter | Specification | Why It Matters |
| Operating Pressure | 55–60 PSI (3.8–4.1 Bar) ±5% | Maintains OE-level fuel rail pressure; eliminates engine hesitation under load. |
| Max Flow Rate | 22 GPH (83 LPH) @ 13.8V DC | Delivers ample fuel for peak engine output without overworking the system. |
| Voltage/Current | 12V DC ±10%; 6–8A | Compatible with standard automotive electrical systems; minimizes power draw. |
| Housing Material | Anodized Aluminum + Stainless Steel Contacts | Resists corrosion, heat (up to 120°C), and wear—critical for long-term performance. |
| Temperature Range | -40°C to 120°C (-40°F to 248°F) | Performs flawlessly in extreme climates (desert heat to arctic cold). |
| Life Cycle Testing | 100,000+ miles simulated / 5,000 hours continuous run | Exceeds OEM requirements for durability; reduces replacement frequency. |
| Noise Level | ≤45 dB | Quieter operation vs. industry average (50 dB); enhances cabin comfort. |
| Certification | ISO/TS 16949:2016 | Manufactured to automotive industry’s top quality management standard. |
| Connector Type | OE-Type SAE J1962-Compatible | Plug-and-play installation; no modifications or adapters needed. |
Product Uses
Here are specific application scenarios of fuel pump:
1. Daily Commuting: Consistency for Urban Drivers
Our pump thrives in stop-and-go traffic, using ±5% pressure tolerance to cut engine hesitation by up to 40% vs. generic pumps. Built for thousands of short trips, it resists wear from frequent starts—perfect for commuters who need smooth, trouble-free performance every morning.
2. Long-Haul Fleets: Minimizing Costly Downtime
Fleet managers rely on our pump’s 100,000+ mile simulated testing to avoid mid-route failures. The corrosion-resistant anodized aluminum housing withstands constant vibration and temperature swings, keeping trucks on the road and reducing roadside repairs—key for maximizing operational uptime.
3. Commercial Use: High-Stress Durability
For vehicles running at full capacity (towing, delivery), our brushless DC motor maintains 55–60 PSI output during extended idling. ISO/TS 16949-certified, it resists overheating—ensuring 24/7 reliability for crews depending on peak power.
4. Extreme Environments: Built to Outlast
Whether in -40°C arctic cold or 120°C desert heat, our dual-material housing prevents thermal expansion/corrosion. Trusted by off-road fleets and remote operators, it delivers consistent fuel flow where others fail—proving toughness in harsh conditions.
5. Aftermarket Replacement: Factory-Grade Simplicity
Installers choose our OE-type connector for plug-and-play installation—cutting labor time by 30% and eliminating fitment errors. With 15 years of OE engineering, it matches factory specs exactly—giving customers original-equipment reliability without the OEM price tag.
Product Operate Guide
Before installing, clean fuel line connectors with a lint-free cloth to avoid debris damage. Secure the OE-type plug with 8–10 Nm torque (no over-tightening). Post-installation, check for leaks, then start the engine: confirm quiet ≤45 dB operation and stable 55–60 PSI fuel pressure. These steps ensure factory-grade reliability—validated by our 100,000+ mile durability testing.
