Product Introduction
J69-6GN3501080 Stable Wear-Resistant Low-Noise Brake Pad for Chery
The J69-6GN3501080 brake pad is engineered for reliable braking performance, built on 15+ years of auto parts R&D experience. It meets global industry standards, holding ISO 9001 and ECE R90 certifications to ensure safety and compliance.
With a stable friction coefficient of 0.38-0.42, it delivers consistent stopping power. Its wear-resistant formula extends service life to over 50,000 km, while the heat-resistant structure endures temperatures up to 350℃ without fading. Each unit undergoes 3 rounds of quality inspections, ensuring perfect fit and long-term durability for target vehicles.
Product Advantage
1. Stable Friction Coefficient & Extreme Heat Resistance
This brake pad maintains a friction coefficient of 0.38-0.42—within the optimal range for safe braking—even in harsh conditions. Its advanced composite structure endures temperatures up to 350℃ without performance fading, avoiding brake failure risks. It fully complies with ECE R90 standards, a global benchmark for brake safety, ensuring consistent stopping power across different road and weather scenarios.
2. Wear-Resistant Formula for Long Service Life
Crafted with high-density ceramic-reinforced materials, the wear-resistant brake pad delivers a service life of over 50,000 km—30% longer than ordinary alternatives. Our lab tests show it resists surface abrasion even after 1,200+ simulated brake cycles, reducing the frequency of replacements for users. This durability is backed by our 15-year expertise in formulating auto friction materials, balancing performance and longevity.
3. Strict Quality Certifications & 3-Round Inspection
Every unit holds ISO 9001 quality management certification and passes 3 rounds of rigorous testing before delivery: first, raw material purity checks; second, dimensional precision verification (tolerance ±0.02mm); third, dynamic braking performance simulation. The final qualification rate reaches 99.8%, eliminating defective products and building trust for global customers. This strict process aligns with our commitment to reliable ECE R90 certified brake pad production.
4. Low Noise & Low Dust Design for User Comfort
Equipped with a noise-dampening steel backing plate and a special lubricating layer, the brake pad reduces braking noise to below 55 decibels—quieter than the industry average of 65 decibels. Its dust-resistant coating also cuts brake dust generation by 40%, keeping wheels cleaner and reducing post-use maintenance. This user-centric design makes it a preferred long-life brake pad for both daily commuting and long-distance driving.
5. Precision Fit for Seamless Installation
With CNC machining technology, the brake pad’s shape and hole positions match target vehicle specifications with a fit accuracy of 99.5%. This eliminates installation gaps that cause brake vibration or uneven wear. Our production team references 10,000+ auto brake system data points to ensure compatibility, making it easy for mechanics to install without additional adjustments—saving time and labor costs.
Technical Parameters
| Category | Parameter | Details |
| Basic Information | Part Number | J69-6GN3501080 |
| Product Type | Disc Brake Pad |
| Application Scope | Passenger Vehicle Brake System |
| Performance Parameters | Friction Coefficient | 0.38-0.42 (stable under -20℃ to 350℃, meets ECE R90 standard) |
| Heat Resistance Temperature | Maximum 350℃ (no performance fading within continuous working at 300℃) |
| Service Life | ≥50,000 km (tested under standard urban-suburban driving conditions) |
| Noise Level | ≤55 dB (measured at 60km/h braking speed, lower than industry average) |
| Dust Generation | ≤0.8g/100km (40% less than ordinary brake pads) |
| Material Specifications | Friction Material | Ceramic-reinforced composite (contains 18% ceramic particles for wear resistance) |
| Backing Plate Material | High-carbon steel (S50C grade, tensile strength ≥520MPa) |
| Adhesive Layer | High-temperature epoxy resin (resistant to 280℃) |
| Dimensional Tolerance | Thickness | 16mm ±0.02mm |
| Width | 58mm ±0.03mm |
| Length | 112mm ±0.03mm |
| Hole Position Tolerance | ±0.01mm (ensures precise installation with brake caliper) |
| Quality Certifications | Main Certifications | ISO 9001 Quality Management System, ECE R90 Brake Safety Certification |
| Testing Standards | Wear Test | ≥1,200 simulated brake cycles (no excessive wear) |
| Compression Test | No deformation under 1,500N pressure |
| Corrosion Resistance Test | Pass 48-hour salt spray test (backing plate no rust) |
Product Uses
Here are specific application scenarios of brake pad:
1. Daily Urban Commuting
Ideal for frequent start-stop driving in cities. Its stable friction coefficient (0.38-0.42) avoids sudden brake failure during rush-hour traffic, while the ≤55dB low-noise design reduces driving annoyance. The 40% lower dust generation also keeps wheels clean, saving users time on regular car washing and maintenance.
2. Long-Distance Highway Driving
Perfect for high-speed and long-duration trips. It endures temperatures up to 350℃ without performance fading—critical for continuous braking on downhill sections. With a service life of ≥50,000 km, it eliminates the need for frequent replacements mid-journey, reducing travel disruptions for long-distance drivers.
3. Complex Climate Conditions (Rain, Snow, Humidity)
Reliable in wet, snowy, or coastal high-humidity environments. The backing plate passes a 48-hour salt spray test (no rust), preventing structural damage from moisture. The friction material’s anti-slip formula also maintains stable braking force on wet roads, reducing the risk of skidding compared to ordinary brake pads.
4. High-Frequency Commercial Use (Taxis, Rental Cars)
Suits vehicles with high daily mileage (e.g., taxis, rental cars). Its ceramic-reinforced material withstands 1,200+ simulated brake cycles without excessive wear—30% more durable than standard brake pads. This reduces the frequency of replacement, cutting maintenance costs for commercial fleet operators.
5. Performance-Oriented Daily Driving
Meets the needs of users seeking both safety and mild performance. It holds ECE R90 certification (a global brake safety benchmark) and delivers responsive braking even at sudden acceleration-deceleration. The precision fit (99.5% accuracy) also avoids vibration during high-speed braking, enhancing driving comfort.
Product Operate Guide
For optimal performance, first ensure professional installation (per ISO 9001 maintenance guidelines) to avoid fit gaps. After installation, run a 200-300km break-in period: avoid sudden hard braking, keep speed under 80km/h, and apply brakes gently to let friction materials adapt.
Check the pad thickness every 5,000km—replace when it’s below 3mm. Avoid continuous hard braking (over 350℃ may reduce performance). If you hear abnormal noise (over 55dB), inspect for debris promptly to maintain safety.
