Product Introduction
S3508200 Responsive Premium Durable Brake Cable for Lifan
Our Brake Cable for Lifan is a core safety component tailored for Lifan vehicles, engineered to deliver consistent braking performance. It efficiently transmits braking force from the pedal to the brake mechanism, ensuring responsive and reliable stopping to mitigate safety risks.
Backed by 15+ years of auto parts manufacturing experience, we optimize its design for seamless compatibility. The cable boasts a tensile strength of up to 850 lbs, features a corrosion-resistant zinc-plated steel core, and maintains stability in -40℃ to 125℃ environments.
Compliant with ISO 9001 and SAE J1171 standards, each unit undergoes 3 rounds of pressure and durability tests. It’s a long-lasting, trusted solution for Lifan brake system maintenance.
Product Advantage
Premium Corrosion-Resistant Material & High Tensile Strength
Backed by 15 years of auto parts manufacturing experience, our Brake Cable for Lifan adopts a double-layer structure: a galvanized steel core with tensile strength up to 850 lbs (385 kg) and a wear-resistant PVC outer sheath. It resists rust and corrosion in humid or dusty environments, maintaining stability in extreme temperatures from -40℃ to 130℃. Compliant with ISO 9001 standards, this corrosion-resistant Lifan brake cable avoids premature damage, ensuring long-term reliability.
100% Compatibility with Lifan Brake Systems
We’ve optimized the cable’s length, end fitting size, and tension parameters based on in-depth analysis of Lifan’s brake system specifications. After 2,000+ sample tests, the high-performance Lifan brake cable achieves 99.8% compatibility with all Lifan models’ brake assemblies. It eliminates installation gaps, ensuring seamless force transmission between the brake pedal and mechanism—no need for additional modifications.
SAE-Certified Safety & Precise Braking Response
This Brake Cable for Lifan meets SAE J1171 (automotive brake cable safety standards) and undergoes 5,000+ cyclic braking tests. During testing, its braking response delay is less than 0.1 seconds, far below the industry average of 0.3 seconds. The ISO-certified Lifan brake cable effectively reduces braking distance, providing drivers with stable and predictable stopping performance to avoid safety hazards.
Low-Friction Design for Extended Service Life
The cable’s outer layer is coated with PTFE (polytetrafluoroethylene), which reduces friction between the cable and protective sleeve by 35%. This design lowers wear during frequent braking, extending the cable’s service life to 30,000+ kilometers—50% longer than ordinary brake cables. For users, this means fewer replacements and lower maintenance costs for their Lifan vehicles.
Strict Quality Control & 12-Month Warranty
Every durable Lifan brake cable undergoes 3 rounds of factory inspections (pressure test, flexibility test, corrosion resistance test) before delivery, with a pass rate of 100%. We offer a 12-month warranty; if quality issues occur under normal use, we provide free replacement. Our customer complaint rate for this product is less than 0.5%, reflecting market recognition of its quality.
Technical Parameters
| Parameter | Specification | Test Standard/Certification |
| Inner Core Material | High-strength galvanized carbon steel (SUS 304 optional for premium models) | SAE J1171 (Automotive Brake Cable Materials) |
| Outer Sheath Material | Wear-resistant PVC + PTFE coating (oil-proof & acid-resistant) | ISO 10487 (Plastic Sheaths for Auto Parts) |
| Tensile Strength | Minimum 850 lbs (385 kg); Maximum 920 lbs (417 kg) | ASTM D412 (Tensile Testing Standard) |
| Braking Response Delay | ≤ 0.1 seconds (under 500N braking force) | In-house cyclic test (5,000+ cycles) |
| Operating Temperature Range | -40℃ (-40℉) to 130℃ (266℉) | IEC 60068-2-1 (Low-Temp Test) & IEC 60068-2-2 (High-Temp Test) |
| Service Life | ≥ 30,000 km (18,641 miles) under normal use | Road simulation test (1,000 hours) |
| Length & Diameter | Length: Customizable (per Lifan’s standard specs, common range: 1200-2500mm); Inner core diameter: 4.5-6mm | Lifan OE Design Standards |
| Corrosion Resistance | ≥ 96 hours salt spray test (no rust or peeling) | ASTM B117 (Salt Spray Corrosion Test) |
| Quality Certification | ISO 9001:2015, IATF 16949 (Automotive Quality Management System) | Third-party audit (SGS/TÜV) |
Product Uses
Here are specific application scenarios of Brake Cable:
1.Daily Urban Commuting with Frequent Braking
Ideal for Lifan vehicles used in cities, where stop-and-go traffic demands frequent braking. Backed by 5,000+ cyclic braking tests, the Brake Cable for Lifan maintains ≤0.1s response delay (meets SAE J1171) even after 10,000+ urban driving miles. Its low-friction PTFE coating avoids cable jamming, ensuring smooth braking for daily commutes.
2.Extreme Climate Conditions (High/Low Temp & Humidity)
Suitable for regions with harsh weather: -40℃ to 130℃ operating range (IEC 60068 standards) resists freezing or melting. Passing 96-hour ASTM B117 salt spray tests, this corrosion-resistant Lifan brake cable works reliably in coastal areas (high humidity) or snowy regions (road salt), preventing rust-related failures.
3.Commercial Lifan Vehicle Operations (Freight/Logistics)
For commercial Lifan vehicles (e.g., light cargo), its 850lbs tensile strength (ASTM D412) handles heavy-load braking. With ≥30,000km service life (50% longer than ordinary cables), it reduces replacement frequency—critical for fleet operations. Compliant with ISO 9001, it minimizes downtime for businesses relying on Lifan vehicles.
4.Professional Automotive Repair & Maintenance
A top choice for repair shops: 99.8% compatibility with Lifan brake systems (tested on 2,000+ samples) eliminates modification needs. Certified to IATF 16949, the durable Lifan brake cable ensures consistent performance, helping technicians deliver reliable repairs and build customer trust.
5.Long-Distance Inter-Regional Travel
For Lifan vehicles used in cross-city trips, its stable braking (no performance drop after 8 hours of continuous use) is key. The PVC+PTFE sheath reduces heat buildup from prolonged braking, avoiding cable deformation. Meets SAE safety standards, providing peace of mind for long journeys.
Product Operate Guide
1.Pre-Installation Safety: First, disconnect the vehicle’s power. Confirm the new Brake Cable for Lifan matches the old one’s length (1200-2500mm, per specs) to avoid mismatch.
2.Installation: Attach end fittings to brake pedal and mechanism, tightening to 8-10 N·m (industry standard). Avoid over-tightening to prevent core damage.
3.Testing: After installation, test braking 5-10 times. Ensure response delay ≤0.1s (meets SAE J1171) and no cable jamming—this guarantees safe use.
