Product Introduction
SMD356178 Durable High-Torque Dependable Starter for Chery
Engineered for robust performance, our starter motor delivers reliable engine ignition across diverse operating conditions. Leveraging 12+ years of automotive component R&D, it integrates a high-torque copper winding motor (95% energy efficiency) and precision planetary gears, reducing wear by 30% vs. standard designs. Tested to ISO 16750-4 standards, it withstands -40°C to 85°C extremes and exceeds 50,000 start cycles—validated by 500k+ field installations. Compliant with CE & TS16949, this unit balances compact size with 25% faster cranking speed, ensuring quick, consistent starts. Trusted by global aftermarket partners, it’s a cost-effective solution for sustained vehicle reliability.
Product Advantage
1. High-Torque Copper Winding Motor: Powerful Cold-Start Performance
Our starter uses a precision copper winding design (vs. standard aluminum), achieving 95% energy efficiency—10% higher than industry norms. This delivers robust torque even in extreme cold (-40°C), eliminating slow cranking or no-start issues common with generic parts. The efficient motor also reduces battery strain, extending its lifespan by ~15% when paired with our unit. Backed by aftermarket pros, this core tech ensures reliable startups for vehicles in harsh climates.
2. Durable Helical Gear Train: 30% Less Wear, Longer Life
We engineered a helical planetary gear system from hardened steel—cutting friction and wear by 30% vs. spur gears. This evenly distributes load, resisting fatigue from rough roads or frequent use. Tested to ISO 16750-4 vibration/shock standards, the gears withstand off-road conditions without degradation. Field data from 500,000+ installations confirms a 40% lower failure rate than competitors, proving long-term durability.
3. 25% Faster Cranking Speed: Consistent, Quick Starts
Optimized rotor-stator alignment and low-friction bearings give our starter a 25% faster cranking speed (up to 2,800 RPM)—halving ignition time in most cases. Ideal for older vehicles or cold environments, this reduces frustration and battery drain. Customer satisfaction rates hit 98% for “no-hesitation” starts, validating our focus on responsiveness.
4. TS16949-Compliant Quality: Zero Defects, Global Trust
Manufactured under TS16949 automotive standards, every unit undergoes 100% pre-shipment testing (load, temperature cycling -40°C to 85°C, durability runs). With 500+ global aftermarket partners and 500,000+ units sold, we deliver zero-defect products on time. Third-party labs confirm CE/RoHS compliance, ensuring you receive parts that meet the highest industry benchmarks.
5. Compact Design: Easy Installation, Wide Compatibility
Our starter’s space-saving footprint aligns with original equipment (OE) mounting points, cutting installation time by 20% for mechanics. Unlike bulky aftermarket options, it fits seamlessly into tight engine bays—reducing labor costs and returns. This design, validated by 10,000+ installs, balances performance with practicality for both repair shops and DIYers.
Technical Parameters
| Parameter | Specification | Key Advantage/Data Context |
| Operating Voltage | 12V DC | Optimized for standard automotive batteries; eliminates voltage drop issues common with generic starters. |
| Peak Current Draw | ≤650A | 10% lower than industry average (720A); reduces battery strain and extends accessory life. |
| Rated Torque | 18–22 Nm | High-torque copper winding motor (95% efficiency)—exceeds OEM cold-start (<-18°C) torque requirements. |
| No-Load Speed | 3,200 RPM | Balanced to avoid gear over-revving; cuts wear by 25% vs. high-RPM competitors (spur gear designs). |
| Loaded Speed (90% Torque) | 2,800 RPM | Ensures rapid engine engagement; slashes start time by 30% in sub-zero conditions. |
| Gear Reduction Ratio | 4.8:1 | Precision helical planetary gears—minimizes friction (30% less than spur gears) for smoother power transfer. |
| Operating Temperature Range | -40°C to +85°C | Validated via ISO 16750-4 environmental testing; performs in deserts, tundras, and heavy rain. |
| IP Rating | IP67 | Dust-tight + water-resistant (1m immersion for 30 mins)—ideal for off-road/dusty markets. |
| Life Cycle Testing | ≥50,000 Starts | 40% higher than industry average (35,000 starts); tested per TS16949 durability standards. |
| Warranty | 12 Months | Backed by 500k+ field installations; 99.2% failure-free rate in Year 1. |
| Certifications | ISO 16750-4, TS16949, CE, RoHS | Compliant with global automotive safety/environmental regulations. |
Product Uses
Here are specific application scenarios of starter:
1. Extreme Climate Resilience: Arctic to Desert Reliability
Trusted by fleets in -40°C Arctic winters and 50°C Middle Eastern deserts, our starter maintains 95% torque output even after 10k+ cold starts. Field data from 200+ Nordic logistics partners shows zero no-start failures during sub-zero months—outperforming generic parts by 40% in extreme cold. ISO 16750-4 validated, it’s built for climates where startup reliability is mission-critical. (Data: Extreme temp performance, fleet validation)
2. High-Frequency Use: Taxis, Ride-Shares & Delivery Vans
Designed for vehicles with 10+ daily starts, our unit lasts 50k+ cranking cycles—15k more than industry averages. A top European taxi company cut starter-related breakdowns by 30% after switching, slashing downtime and maintenance costs. TS16949-compliant, it’s a cost-effective fix for high-utilization commercial fleets. (Data: Cycle life, fleet ROI)
3. Older Vehicle Upgrades: Restoring Startup Performance
For cars with 100k+ miles and worn OEM starters, our high-torque copper winding motor eliminates slow cranking. 98% of aftermarket installers confirm instant, hesitation-free starts in retrofits—backed by 500k+ upgrades. It fits seamlessly without engine mods, ideal for classic car owners or budget-conscious upgraders. (Data: Retrofits, installer feedback)
4. Off-Road & Dusty Environments: Built for Debris & Vibration
With an IP67 rating and helical gears resistant to dust/mud, our starter thrives in off-road trucks or rural vehicles. Tested in dune bashing (ISO 16750-4), it withstands extreme vibration—field feedback from 100+ off-road clubs shows a 95% survival rate after 2 years of hard use. (Data: Durability, off-road testing)
5. Mechanic-Friendly: Quick, Tool-Free Installation
Our compact, OE-aligned design cuts install time by 20% vs. bulky aftermarket units. 85% of independent mechanics praise its “drop-in fit” and pre-tested components—reducing return trips and customer complaints. Trusted by 500+ repair shops, it’s a time-saver for busy service centers. (Data: Install efficiency, mechanic approval)
Product Operate Guide
Maximize lifespan with these expert-backed steps: First, clean mounting surfaces—vibration causes 30% of premature wear (TS16949 data). Confirm battery polarity (+/-): 98% of misfires stem from incorrect connections (our lab validation). Torque bolts to 12-15Nm (OE-matched spec). Test-start: smooth cranking (<2s delay) signals proper engagement. Trusted by 500k+ installs, these steps ensure trouble-free performance.
