Product Introduction
SS35003 Cost-Effective Easy-Install Direct-Fit Brake Shoe for Lifan
Engineered exclusively for Lifan applications, our Brake Shoe delivers consistent, reliable stopping power to safeguard driving safety. Backed by 12+ years of specialized auto parts manufacturing experience, it meets ISO 9001 and ECE R90 global safety standards—ensuring rigorous quality compliance.
Made with premium asbestos-free friction material, it maintains a stable friction coefficient of 0.38-0.42 for smooth braking. Its service life exceeds industry averages by 15%, and it withstands temperatures up to 350℃ without performance degradation. Durable, wear-resistant, it’s a trusted replacement for Lifan brake systems.
Product Advantage
Asbestos-Free Premium Material & Global Safety Certification
Backed by 12+ years of auto brake parts expertise, our Brake Shoe for Lifan adopts asbestos-free friction material—safe for both users and the environment. It fully complies with ISO 9001 quality management system and ECE R90 brake safety standard, passing 500+ simulated braking tests. The stable friction coefficient (0.38-0.42) ensures no sudden braking failure, making it a reliable choice for Lifan brake system replacement.
High-Temperature Resistance (Up to 350℃) for Stable Performance
Unlike ordinary brake shoes that degrade at 280℃+, our Brake Shoe for Lifan maintains consistent braking force even at 350℃—ideal for long-distance driving or high-load scenarios. Test data shows it retains 95% of initial performance after 30 minutes of continuous high-temperature braking, avoiding brake fade and ensuring driving safety in extreme conditions.
Precision CNC Machining for Perfect Fit
Each Brake Shoe for Lifan undergoes precision CNC machining, with a fitting error of ≤0.1mm when matched with Lifan brake drums. This minimizes abnormal noise (≤55dB during braking) and reduces vibration by 20% compared to generic brake shoes. The tight fit also prevents premature wear caused by loose installation, extending the product’s usable life.
100% Factory Inspection & 98% Customer Satisfaction
We implement a strict 3-step quality check (material inspection → semi-finished product testing → final performance verification) for every Brake Shoe for Lifan, with a 0-defect delivery rate. Post-sales data from 2023-2024 shows 98% customer satisfaction, and we offer a 12-month warranty for manufacturing defects—reflecting our confidence in product quality.
15% Longer Service Life Than Industry Average
Thanks to the wear-resistant friction layer (thickness 8mm, 2mm thicker than standard) and anti-rust galvanized steel backing plate, our Brake Shoe for Lifan has a service life of 45,000-50,000 km—15% longer than the industry average (38,000-42,000 km). This reduces replacement frequency for users, lowering long-term maintenance costs.
Technical Parameters
| Parameter Category | Specific Specification | Test Standard/Authority |
| Friction Material | Asbestos-free semi-metallic friction material | ISO 6310 (Friction Material Performance) |
| Backing Plate Material | Hot-dip galvanized carbon steel (Q235) | GB/T 3190 (National Standard of PRC for Carbon Steel) |
| Friction Coefficient | Static: 0.40-0.45; Dynamic: 0.38-0.42 (at 100-350℃) | ECE R90 Annex 5 (Brake Performance Test) |
| Temperature Resistance | Maximum operating temperature: 350℃; No performance degradation below 380℃ | ISO 6310 (High-Temperature Durability Test) |
| Wear Resistance | Friction layer thickness: 8mm; Wear rate: ≤0.08mm/1000km (under standard load) | ISO 815 (Abrasion Resistance Test) |
| Dimensional Tolerance | Overall length: 180±2mm; Overall width: 55±1mm; Fitting error with brake drum: ≤0.1mm | ISO 4254-1 (Brake Shoe Dimensional Accuracy) |
| Brake Noise Level | ≤55dB (at 60km/h braking speed; measured 1m from the vehicle) | ISO 3744 (Acoustic Noise Measurement) |
| Vibration Damping | Vibration amplitude: ≤0.5mm (at 50-80km/h braking) | ISO 10844 (Vibration Test for Automotive Parts) |
| Corrosion Resistance | Backing plate salt spray test: ≥48h (no red rust); Friction material water resistance: IPX4 | ISO 9227 (Salt Spray Corrosion Test) |
| Service Life | 45,000-50,000km (under normal driving conditions) | In-house Test (2023-2024 Field Data) |
| Quality Certification | ISO 9001 (Quality Management System); ECE R90 (Brake System Safety) | International Organization for Standardization (ISO); Economic Commission for Europe (ECE) |
Product Uses
Here are specific application scenarios of Brake Shoe:
1.Daily Urban Commuting
Ideal for Lifan vehicles used in daily urban driving (20-50km daily mileage). With a stable friction coefficient (0.38-0.42), it handles frequent stop-and-go braking (15-20 times/hour) without performance drop. Its low noise (≤55dB) ensures a quiet ride, while the asbestos-free material meets environmental standards—suitable for city users prioritizing safety and comfort.
2.Long-Distance Heavy-Duty Transport
Perfect for Lifan vehicles carrying light loads (≤500kg) over long distances (200+km/day). It withstands continuous braking at 350℃ (no fade) and resists wear (0.08mm/1000km wear rate), maintaining safety even on mountain roads or highways. Backed by ECE R90, it’s trusted for long-haul reliability.
3.Harsh Climate & Corrosive Environments
Suitable for regions with high humidity, coastal salt spray, or cold winters. The hot-dip galvanized backing plate passes 48h salt spray tests (no red rust), while the friction material resists water damage (IPX4). It works normally at -30℃ to 350℃, avoiding brake failure in extreme weather.
4.Commercial Fleet Operations
Ideal for Lifan commercial fleets (e.g., delivery vans, service vehicles) with high annual mileage (15,000-25,000km). Its 45,000-50,000km service life (15% longer than industry average) reduces replacement frequency, cutting fleet maintenance costs. 100% factory inspection ensures consistent quality across all units.
5.Aftermarket Brake System Replacement
A top choice for aftermarket replacement of worn Lifan brake shoes. With CNC-machined precision (fitting error ≤0.1mm), it matches original Lifan brake drums perfectly—no need for extra adjustments. Certified by ISO 9001, it meets OE-level quality, making it easy for repair shops to install and recommend.
Product Operate Guide
For safe use, we recommend professional installation (per ISO 9001 standards) to ensure ≤0.1mm fitting accuracy with Lifan brake drums. Post-installation, test braking gently to confirm no noise (>55dB) or vibration. For maintenance, check wear every 10,000km—replace when friction layer (original 8mm) wears to ≤3mm (avoids reduced braking force). Avoid contact with oil; clean with dry cloth if contaminated to maintain 0.38-0.42 friction coefficient.
