T11-8403701-DY Fender for Chery

Product Introduction

T11-8403701-DY Fender for Chery

Our replacement car fenders are precision-engineered for seamless fitment on popular vehicle models . Crafted from high-grade PP plastic or galvanized steel, they provide robust defense against road debris, stone chips, mud splashes, and corrosion. Featuring OEM-equivalent mounting points and contour lines, installation requires no modification. Choose from primer-coated or pre-painted options . Ideal for collision repair shops, insurance replacements, and custom car builders seeking durable protection while maintaining original aesthetics. Enhance your car’s value and longevity today!

Product Advantage

1. OEM-Exact Car Fender Fitment for 2000+ Models

Utilizing 3D digital mold scanning with ±0.8mm tolerance. Over 2,500 compatibility tests/year ensure zero gap installation. Supported by VIN-based search system - 99.3% clients confirm direct bolt-on replacement without modification.

2. 5-Layer Anti-Corrosion Car Fender Protection

Features military-grade protection: 1) Zinc phosphate pretreatment (12μm), 2) ED electro-coating (20μm), 3) Epoxy primer (35μm), 4) Base color coat, 5) UV-cured clear coat (50μm). Passed 1,500-hour salt spray test. Guarantees 10-year rust resistance in coastal climates.

3. Lightweight TPO Car Fender with Impact Absorption

Made of aerospace-grade TPO (Thermoplastic Olefin), 40% lighter than steel yet absorbs 18% more impact energy (tested at -40℃~85℃). Reduces vehicle weight by 4.8kg per fender, improving fuel efficiency by 2.5%. Meets FMVSS 581 collision standards with 15J dent resistance.

4. Certified Eco-Friendly Car Fender Production

Produced in ISO 9001/14001 certified factories with 92% material utilization rate. Zero wastewater discharge + 85% recycled TPO content. Full compliance with REACH, IMDS, RoHS standards. SGS reports confirm 0.38ppm VOC emission.

5. Damage-Proof Car Fender Logistics System

Triple-layer packaging: 1) Anti-scratch PE film, 2) Edge-reinforced cardboard, 3) Custom EPS corner brackets. Withstands 1.8m drop tests (ISTA 3A standard).

6. Rigorous Car Fender Quality Validation

Each batch undergoes 7 destructive tests: ① 1,000+ door impact cycles, ② -30℃~90℃ thermal shock, ③ 200km stone chip simulation, ④ 1,500hr UV aging, ⑤ 95% humidity corrosion, ⑥ 10Hz vibration fatigue, ⑦ chemical solvent resistance.

Product Uses

Here are specific application scenarios of Fender:

1. Collision Repair Centers: 15-Minute Bolt-On Installation

Our OEM-fit car fenders enable direct replacement without panel cutting or welding. Pre-drilled holes align with factory mounting points, reducing labor time by 30%. Certified by I-CAR training centers - 98% of repair shops confirm 15-minute installation per fender. Ideal for high-volume shops handling 50+ vehicles/month.

2. Used Car Dealers: Cost-Effective Aesthetic Renewal

Upgrade aged vehicles with our UV-resistant color-coated fenders.

3.Fleet Operators: Salt-Resistant Protection

Zinc-phosphated fenders extend service life in de-icing salt environments.

4. Off-Road Enthusiasts: Impact-Absorbing Upgrade

Our 3mm thickened TPO fenders withstand rock impacts at 80km/h (tested per SAE J2562). 35% higher dent resistance vs. stock parts.

5. Tropical Workshops: Humidity-Proof Performance

ED-coated inner surfaces prevent galvanic corrosion at metal joints.

6. Auto Parts Distributors: Inventory Optimization

Smart VIN matching system covers 2000+ models with single SKU.

Product Operate Guide

Four step quick installation guide (applicable to repair shops)

Core tools: T30 wrench/10mm socket/3M double-sided tape

Step 1: Dismantle the old parts (disconnect the power and remove the headlight harness)

Step 2: Clean the contact surface (wipe the beam frame with IPA solution)

Step 3: Align the holes (fix the top 2 bolts first)

Step 4: Torque tightening (8-12Nm cross sequence locking)

Attention: After installation, testing the headlight gap to be ≤ 3mm is considered qualified

Rainy season rust prevention pretreatment (a must see for individual users)

Consumables: Zinc based anti rust spray/sealant

Spray a 30cm thick anti rust layer on the joint of the inner sheet metal of the fender (with a focus on covering the bolt holes)

Paste a 5mm wide sealing strip on the edge (to avoid mud and sand rubbing against the paint surface)

Avoid high-pressure car washing within 72 hours after installation

FAQ

Q1: Are you manufacturing company?

A: Yes. We are factory, located in Guangzhou. Our factory has certificate of lATF 16949.

Q2: What are your main products?

A: We have steering rack ,steering pump ,wheel hub and bearing ,drive shaft ,alternator,control arm and so on.

Q3: What is the lead time?

A: lt takes 3-7 days when stock is available, and 15-40 days when out of stock.

Q4: What is the warranty?

A: Our guarantee period is 60,000 kilometers or 1 year.

Q5: Do you have samples?

A: Yes, we have samples available. For bulk orders, please inquiry us for more details.