Product Introduction
1012020 Optimized Cost-Effective OEM-grade Oil Filter for Great Wall Motor
Engineered for robust engine protection, our 1012020 Oil Filter excels in removing contaminants from engine oil, ensuring optimal lubrication and reducing wear. Constructed with precision-wound synthetic media, it delivers 99.6% filtration efficiency, capturing particles as small as 4 microns—critical for long-term engine health. Tested to withstand pressures up to 7 bar and temperatures exceeding 160°C, it maintains performance under extreme conditions. Backed by 15 years of automotive filtration R&D and ISO/TS 16949 certification, this filter combines OEM-grade reliability with aftermarket cost-effectiveness, trusted by global repair networks for consistent, durable service.
Product Advantage
1. Advanced Synthetic Media for Unmatched Contaminant Removal
Our filter uses precision-wound synthetic media—engineered to trap 99.6% of particles as small as 4 microns (dirt, metal shavings, and carbon sludge). This reduces engine wear by up to 30% vs. generic paper filters, extending component life and preserving oil viscosity. Ideal for high-stress driving (towing, off-roading) where clean oil is non-negotiable for peak performance.
2. Extreme-Condition Durability That Lasts
Built to withstand harsh environments, this filter resists pressures up to 7 bar (101 psi) and temperatures exceeding 160°C (320°F)—validated by SGS testing. It maintains structural integrity for 15,000+ miles (24,000 km) or 12 months, preventing leaks and ensuring consistent oil flow during stop-and-go traffic or prolonged idling. No more premature failures in extreme climates.
3. ISO/TS 16949-Certified Quality Control
Every filter adheres to strict ISO/TS 16949 automotive standards—from raw material screening to final performance testing. We conduct 12 quality checks per unit, including burst pressure (up to 30 bar) and flow rate validation. This certification guarantees a product trusted by global repair networks for meeting OEM-grade reliability without the OEM price tag.
4. Leak-Free Design & Optimized Oil Flow
The dual-layer rubber gasket and precision-threaded housing eliminate leaks, even under high pressure. Our optimized internal flow path reduces oil pressure drop by 15% vs. competitors—ensuring your engine gets clean oil faster on startup (critical for reducing cold-start wear). It fits most standard oil filter threads, making installation hassle-free for mechanics and DIYers alike.
5. Cost-Effective Aftermarket Performance
Priced 25% lower than comparable OEM filters, our 1012020 delivers identical protection. We back it with a 12-month warranty and 30-day money-back guarantee—giving you peace of mind without compromising quality. Trusted by independent shops and fleet managers for replacing OEM parts while cutting costs.
Technical Parameters
| Parameter | Specification | Test Standard/Authority |
| Media Type | Precision-wound synthetic blend | Multi-layer design (cellulose + synthetic) for balanced filtration & longevity |
| Filtration Efficiency | ≥99.6% @ 4 microns | ISO 16889 (particle count test); removes dirt, metal shavings, and carbon soot
|
| Max Operating Pressure | 7 bar (101 psi) | SAE J2064; prevents burst under high-rev or towing loads |
| Temperature Range | -30°C to +160°C (-22°F to +320°F) | Tested via SGS for extreme cold starts & high-engine heat |
| Oil Capacity | Approx. 0.3 L (0.32 qt)
| Includes media + housing volume for optimal oil retention |
| Thread Size & Seal | M16x1.5 (SAE O-ring) | Universal fit for standard oil filter housings (prevents cross-threading) |
| Dimensions (H x D) | Approx. 65mm x 30mm (2.56" x 1.18") | Ensures compatibility with common mounting points |
| Gasket Material | Nitrile rubber | Resistant to oil degradation, vibration, and extreme temps (prevents leaks) |
| Certifications | ISO/TS 16949:2009 | Compliant with automotive quality management systems |
| Warranty | 12 months | Backed by factory performance testing & defect coverage |
Product Uses
Here are specific application scenarios of oil filter:
1. Daily Commuting & Urban Driving
Ideal for regular short trips where engines accumulate sludge and carbon. Our filter’s 99.6% filtration efficiency @ 4 microns traps fine contaminants, reducing varnish buildup and extending component life. Perfect for stop-and-go traffic—preserving oil viscosity and ensuring smooth starts after weeks of city use. Backed by 15 years of R&D to handle low-speed, high-idle wear.
2. Extreme Climate Operations
Performs in harsh temperatures: -30°C (-22°F) cold starts (nitrile gasket resists cracking) and +160°C high heat (synthetic media won’t degrade). SGS-tested to maintain integrity in Arctic winters/desert summers, ensuring fast oil flow on startup—critical for reducing cold-engine wear in regions with wide temp swings.
3. Fleet Maintenance & Commercial Vehicles
A cost-effective solution for business fleets. ISO/TS 16949-certified with 12 quality checks/unit, it matches OEM performance at 25% lower cost. Comes with a 12-month warranty, cutting downtime and repair claims—ideal for delivery, taxi, or construction fleets prioritizing uptime.
4. DIY Repairs & Home Mechanics
Designed for hands-on users: simple M16x1.5 thread fits standard housings, no special tools needed. Combines OEM durability (30 bar burst pressure) with aftermarket affordability. Saves time/labor vs. dealerships—perfect for weekend mechanics wanting reliable protection without compromise.
Product Operate Guide
Start by cleaning the filter housing and surrounding area—eliminates debris that could harm your engine. Inspect the nitrile gasket for cracks; replace if damaged. Hand-tighten the filter onto the housing, then use a wrench to torque it to 15-20 Nm (SGS-validated to prevent leaks or over-compression). Start the engine, let it idle for 1–2 minutes, and check for seepage around the gasket. This ensures a secure seal and maximizes filtration efficiency (99.6% @ 4 microns) for long-term engine health.
