1014000504 Front Lower Arm Bushing for Geely CK

Product Introduction

1014000504 Front Lower Arm bushing for Geely CK

Our Front Lower Control Arm Bushing is a vital suspension component engineered to securely connect your vehicle's control arm to the frame. It acts as a pivot point and a cushion, effectively absorbing road shocks and vibrations while providing precise control over wheel movement. Manufactured from high-density rubber or polyurethane, it is designed to resist wear, deformation, and oil degradation. This OE-replacement bushing restores vehicle stability, steering response, and alignment accuracy, eliminating common issues like wandering and uneven tire wear for a smoother, safer ride.

Product Advantage

1. Excellent durability and fatigue resistance performance

Our lining is made of high-strength, high elasticity natural rubber and synthetic polymer composite formula, which has been treated with special vulcanization technology to increase its tear strength by more than 20%. It can effectively resist road impact, oil pollution erosion, and ozone aging, greatly extending its service life. The average durability test exceeds 100000 kilometers, far exceeding ordinary products in the market, providing you with long-term reliable protection.

2. Accurate vehicle handling and comfortable quietness

The internal structure has been optimized through computer simulation (CAE), achieving a perfect balance between maneuverability and comfort. It can effectively filter out small vibrations from the road surface, ensuring smooth and quiet driving. At the same time, its high radial stiffness ensures precise tire positioning during turning and lane changing, providing a clear road feel and sensitive steering response, restoring a solid driving experience like a new car.

3. Strengthen structural design for stability and reliability

The built-in reinforced metal sleeve and anti deformation baffle ensure that the liner will not shift, deform or make abnormal noises under huge torque and impact. Its yield strength is 15% higher than the OE standard, which can firmly lock the control arm and maintain the stability of the suspension geometry, effectively preventing tire wear and four-wheel alignment problems caused by excessive clearance between the bushings.

4. Original factory quality and worry free installation

Strictly manufacture according to OEM specifications and dimensions, providing precise replacement of original hole positions. Whether it's rubber hardness, installation angle, or outer diameter size, it ensures a perfect match with your car, achieving worry free installation (Press Fit). This avoids potential damage during installation and ensures that its performance is fully utilized, making it a reliable choice for repair shops and DIY users.

5. Strict quality testing and global certification

Each batch of products undergoes durability fatigue testing, environmental simulation testing, and material physicochemical analysis. Our bushings comply with ISO 9001 quality management system and SAE J related standards, and provide a 12-month quality assurance. We promise that every product has excellent consistency, reliability, and safety, making us your trusted partner.

Technical Parameters

1.Core Material & Structure

Rubber Component: High-density natural rubber + EPDM blend (Shore hardness: 65±5 A, compression set ≤15% after 70℃×22h)

Inner Sleeve: 45# carbon steel (surface treatment: galvanization, corrosion resistance: 480h salt spray test no rust)

Outer Casing: Aluminum alloy (6061-T6, tensile strength ≥310MPa, lightweight design: 15% lighter than steel casings)

2.Dimensional Specifications

Inner Sleeve Diameter: 18mm-25mm (common sizes: 20mm for Honda Civic, 22mm for Toyota Corolla)

Outer Casing Diameter: 35mm-45mm (matches OE lower arm mounting hole)

Total Length: 40mm-60mm (varies by model; standard 48mm for compact cars)

Rubber Thickness: 8mm-12mm (ensures sufficient cushioning while maintaining structural stability)

3.Performance & Durability Metrics

Load Capacity: Static radial load ≥5000N, dynamic radial load ≥3500N (meets SAE J2530 standard)

Vibration Damping: Damping ratio ≥0.25 (reduces road vibration transmission by 30% vs. OEM rubber bushings)

Service Life: ≥80,000 miles or 5 years (under normal driving conditions, no cracking or deformation)

Flexibility: Angular deflection range ±8° (allows smooth lower arm movement without binding)

4.Environmental Resistance

Temperature Range: -40℃~120℃ (stable performance in extreme cold/hot climates)

Chemical Resistance: Resistant to engine oil, gear oil, and road salt (no swelling after 1000h immersion test)

UV Resistance: Passes 1000h xenon lamp aging test (rubber hardness change ≤10%)

5.Certification & Compatibility

Quality Certifications: ISO 9001, IATF 16949, and TÜV Rheinland test approval

Fitment Coverage: 92% of mainstream passenger cars

Installation: Direct OE replacement (matches OE mounting points, no modification needed for installation)

Product Uses

Here are specific application scenarios of Front Lower Arm bushing:

1. Resolve chassis noise and looseness

When your vehicle drives over bumpy roads or speed bumps, if there is a "creaking" or loose "clanging" sound coming from the front chassis, it is often a typical symptom of aging and cracking of the lining. Replacing our reinforced bushings can completely eliminate these annoying noises, restore the overall feel of the vehicle, make the chassis tighter and quieter, and improve driving quality and comfort.

2. Correct vehicle deviation and tire wear

Aging bushings can cause loosening of the control arm position and damage the precise four-wheel alignment parameters. This is directly manifested as an misaligned steering wheel, automatic deviation during vehicle operation, and uneven abnormal wear on the inside or outside of the tires (especially the front wheels). Replacing the lining is the fundamental solution to restore stable driving, protect expensive tires, and avoid long-term misalignment.

3. Restore precise steering and handling stability

Damaged bushings can cause unnecessary clearance, resulting in blurry steering, virtual positioning, significant shaking of the vehicle body when cornering, and a lack of confidence. Our high-performance bushings can firmly lock the control arm, significantly reduce suspension deformation, provide you with direct road feedback and precise steering response, and regain the driving pleasure and safety stability of a new car.

4. Regular high standard maintenance and accident repair

For vehicles traveling over 80000 kilometers or undergoing comprehensive chassis maintenance, preventive replacement of bushings is a professional and high standard maintenance plan. At the same time, it is also applicable to the maintenance of vehicles that have experienced collision accidents in the front, which is a key step in restoring the original geometric structure and safety performance of the suspension system, ensuring that the repaired vehicle performance remains the same as before.

5. Preparation for Vehicle Annual Inspection (MOT) and Safety Certification

Excessive wear, cracking, or detachment of bushings can cause suspension geometry misalignment, which may prevent the vehicle from passing strict annual safety inspections. Replacing our high-quality bushings can ensure that the suspension system meets safety standards, solve the problem of inspection failure caused by excessive chassis clearance, and help you pass the annual inspection quickly and smoothly.

Product Operate Guide

1. Disassembly: Safely remove the wheels. Remove the entire front lower control arm assembly. This may require loosening the ball joint, stabilizer bar linkage, and pivot bolt.

2. Core steps (requiring professional tools): Use a hydraulic press and a specialized liner tool kit to press out the old liner from the control arm. Thoroughly clean the liner seat.

3. Installation: Apply an appropriate amount of lubricant on the outside of the new liner. Use a press and tools to accurately and smoothly press the new liner into the control arm seat, ensuring that its orientation is completely consistent with the original factory specifications.

4. Reset and positioning: Reinstall the control arm onto the vehicle. It is crucial to perform four-wheel alignment after installation to restore the correct wheel camber and toe angle.

FAQ

Q1: Are you manufacturing company?

A: Yes. We are factory, located in Guangzhou. Our factory has certificate of lATF 16949.

Q2: What are your main products?

A: We have steering rack ,steering pump ,wheel hub and bearing ,drive shaft ,alternator,control arm and so on.

Q3: What is the lead time?

A: lt takes 3-7 days when stock is available, and 15-40 days when out of stock.

Q4: What is the warranty?

A: Our guarantee period is 60,000 kilometers or 1 year.

Q5: Do you have samples?

A: Yes, we have samples available. For bulk orders, please inquiry us for more details.