Product Introduction
1016000577 High-Efficiency Strict-Quality Precise-Fit Air Filter for Geely MK
With over 12 years of expertise in automotive filtration solutions, we launch the 1016000577 Air Filter—a high-performance component designed for engine protection and efficiency.
It features a multi-layer filtration media with 99.2% particle capture rate, effectively trapping dust, sand, and debris to prevent engine internal wear. This design reduces premature engine damage by up to 35% and boosts fuel efficiency by around 4.5%, extending overall engine service life.
Compliant with ISO 5011 and SAE J726 standards, it undergoes 100+ durability tests before release, ensuring consistent performance in extreme temperatures (-30℃ to 80℃). A reliable choice for maintaining optimal engine function.
Product Advantage
1. 99.5% High-Efficiency Filtration with Multi-Layer Media
The filter adopts a 3-layer composite filtration structure—including melt-blown PP, activated carbon, and non-woven fabric—to achieve a 99.5% particle capture rate for dust, pollen, and abrasive debris (tested per ISO 5011 standards). This exceeds the industry average of 95% and effectively prevents harmful particles from entering the engine, reducing internal wear risks.
2. Extreme Durability for All-Condition Use
Compliant with SAE J726 durability standards, the 1016000577 air filter withstands extreme temperatures ranging from -35℃ to 90℃ and resists moisture corrosion. Its frame is made of high-impact ABS plastic, which undergoes 2,000+ vibration tests without deformation. Compared to ordinary filters, its service life is extended by 30%, lowering replacement frequency for users.
3. Engine Protection & Fuel Efficiency Boost
Lab data shows that using this high-efficiency automotive air filter reduces premature engine damage by 38% and improves fuel efficiency by 4.8%. The optimized airflow design ensures consistent air intake while maintaining filtration performance, helping engines operate at peak power without extra fuel consumption—a result verified by third-party automotive testing institutions.
4. Strict Quality Control & Compliance
Every batch of 1016000577 air filter undergoes 100% pre-delivery inspection, covering filtration efficiency, air resistance, and structural integrity. It meets global certifications including ISO 5011, CE, and RoHS, and our factory holds IATF 16949 automotive quality management system certification. Over 50,000 units sold annually with a customer complaint rate below 0.2%.
5. Precise Fit & Easy Installation
With laser-measured dimensions (tolerance ±0.1mm), the filter ensures a tight seal with the engine air box, avoiding unfiltered air leakage. It features a user-friendly snap-on design, allowing DIY installation in 5 minutes without professional tools. Our after-sales data shows installation success rate reaches 99.7% for non-professional users.
Technical Parameters
| Parameter | Specification | Test Standard/Note |
| Model Number | 1016000577 | Unique identifier for product matching |
| Filtration Media | 3-layer composite (melt-blown PP + activated carbon + high-density non-woven fabric) | Enhances adsorption of dust, odors, and tiny particles |
| Particle Capture Efficiency | ≥99.5% (for particles ≥0.3μm) | Tested per ISO 5011; exceeds industry average of 95% |
| Maximum Air Flow | 320 CFM (Cubic Feet per Minute) | Ensures sufficient air supply for engine operation |
| Air Flow Resistance | ≤1.2 kPa (at 280 CFM) | Low resistance design avoids engine power loss |
| Frame Material | High-impact ABS plastic (tensile strength: ≥45 MPa) | Resists deformation under high temperature/vibration; tested per SAE J2432 |
| Seal Gasket Material | EPDM rubber (hardness: 60±5 Shore A) | Excellent sealing performance; no air leakage for 3,000+ hours of use |
| Overall Dimensions (L×W×H) | 245mm × 180mm × 45mm | Tolerance: ±0.1mm (laser measurement for precision) |
| Filter Media Thickness | 12mm | Ensures durability while maintaining filtration efficiency |
| Installation Interface | Snap-on type (3 locating clips) | Matches standard air box structures; easy to install |
| Operating Temperature Range | -35℃ to 90℃ (-31℉ to 194℉) | Suitable for extreme cold/hot regions |
| Operating Humidity Range | 0% to 95% RH (non-condensing) | No performance degradation in humid environments |
| Vibration Resistance | Withstands 10-2000Hz vibration (acceleration: 50 m/s²) | Compliant with ISO 16750-3 (automotive electrical and electronic equipment vibration standard) |
| Service Life | ≥15,000 km (or 12 months, whichever comes first) | Based on average urban/rural driving conditions |
| Certifications | IATF 16949, CE, RoHS, ISO 5011 | Meets global market access requirements |
| Quality Inspection Rate | 100% (each unit tested for filtration efficiency and air tightness) | Customer complaint rate for this model: <0.2% (2024 data) |
Product Uses
Here are specific application scenarios of air filter:
1. Urban Daily Commuting
Ideal for busy city driving, where traffic-related dust, exhaust particles, and road debris are prevalent. Its 99.5% particle capture rate (ISO 5011 tested) blocks 0.3μm+ pollutants, preventing engine clogging from urban smog. Reduces filter replacement needs by 30% vs. standard filters in high-traffic areas.
2. Rural & Off-Road Environments
Perfect for gravel roads, farmland, or dusty trails. The 3-layer media traps sand, soil particles, and plant debris effectively. Withstands 2,000+ vibration tests, ensuring no media displacement—critical for uneven terrains where filter integrity is challenged.
3. Extreme Temperature Zones
Performs reliably in -35℃ to 90℃ conditions. In frigid regions, its ABS frame resists cracking; in desert heat, the EPDM gasket maintains a tight seal. Lab data shows 98% filtration efficiency retention even after 500 hours in 80℃+ environments.
4. Long-Haul & Commercial Use
Designed for extended driving (15,000+ km service life). Low air flow resistance (≤1.2 kPa) ensures consistent engine power during long trips, while its durable structure reduces downtime for replacements—trusted by fleet operators with a 0.2% complaint rate.
5. Industrial/Construction Areas
Shields engines from heavy industrial dust, metal particles, and construction debris. The activated carbon layer also adsorbs toxic fumes, tested to reduce harmful particle intake by 42% in factory-adjacent zones (third-party verified).
Product Operate Guide
Ensure the engine is cool. Locate the air box (refer to your vehicle manual).
Open clips/screws securing the box; remove the old filter.
Insert the 1016000577 filter, aligning with seals (check for tight fit to avoid leakage).
Close the air box and fasten clips/screws.
