1017015737 Headlight for Geely Freedom Car

Product Introduction

1017015737 Headlight for Geely Freedom Car

Engineered with Osram 6500K LED chips delivering 12,000LM/pair, our headlights feature IP6K9K waterproof rating and adaptive beam technology that auto-adjusts to steering/load changes. The 3mm Makrolon® polycarbonate lenses resist UV yellowing and 5J impacts, while integrated Can-Bus decoders ensure plug-and-play installation for 2010-2024 models. Certified to DOT/SAE/ECE R112 standards with 50,000-hour lifespan – transforming night driving safety for sedans, SUVs, and trucks.

Product Advantage

1. 200% Brighter LED Headlight Beams

Equipped with Osram 6500K LED chips delivering 12,000LM per pair. Precision projector lenses achieve 260m illumination range - 150% wider than OEM. Passed SAE J581/J583 glare control tests with 95% oncoming driver approval rate .

2. IP6K9K Waterproof Headlight System

Triple-sealed housing with silicone gaskets + vented caps prevents fogging. Survived 30-min 100°C steam test and 1m underwater immersion  99.3% failure-free rate in monsoon regions.

3. Can-Bus Ready Plug & Play Headlights

True plug-and-play design - no wiring modification needed. 100% fitment for 2010-2024 models with 3-step installation: Unplug old → Align tabs → Click new.

4.10-Year Lifespan LED Headlight Tech

Aircraft-grade aluminum heatsinks keep junction temp at 65°C . Samsung driver ICs ensure stable voltage. Accelerated aging tests confirm 50,000-hour lifespan.

5. Smart Adaptive Headlight System

Built-in G-sensor and steering linkage activates 15° beam swivel at >30km/h. Auto-height adjustment compensates for load changes. Compatible with lane assist systems - 32% night accident reduction .

6. Impact-Resistant Polycarbonate Lens

3mm thick Makrolon® lenses withstand 5J impacts. Nano-coating technology blocks UV yellowing - maintains 98% light transmission after 5 years. Passed gravel test at 80km/h.

Technical Parameters

1. Optical performance parameters

Brightness output: 12000LM/pair

Color temperature: 6500K pure white light

Illumination distance:

Low beam: 180m

High beam: 260m

Beam mode: EURO light cutting line

2. Durability parameters

Waterproof rating IP6K9K (steam at 100 ℃ for 30 minutes)

Dust proof rating IP6K (8-hour dust chamber test)

Impact resistance 5J crushed stone impact (80km/h)

Temperature tolerance -40 ℃~105 ℃ cycling 2000 times

UV aging resistance for 5 years, light transmittance ≥ 98%

3. Electronic system parameters

Chip solution: Osram Duris P9 LED (light efficiency 180LM/W)

Driver: Samsung 32-bit IC (input voltage: 9-32V DC)

Decoding support:

CAN/LIN bus protocol coverage: 98%

Resistance simulation range: 6 Ω -50 Ω (error proof)

Heat dissipation design:

Aviation aluminum fin radiator (surface area: 820cm ²)

Node temperature: ≤ 65 ℃ (infrared thermal imaging verification)

Product Uses

Here are specific application scenarios of Headlight:

1. Collision repair shop: 45 minute rapid replacement

Original factory plug direct connection design (no need to change wiring)+precise buckle positioning, reducing labor hours by 38% compared to traditional lighting fixtures.

2.Logistics Fleet: Solution for Fog Zone Penetration

The penetration power of the 3000K amber fog light mode has been increased by 2.2 times. IP6K9K sealing level can withstand high-pressure car washing, reducing the failure rate to 0.4%.

3.Off road modification: shock and sandstorm prevention configuration

The 3mm bulletproof polycarbonate lampshade has passed the 5J impact test. The bottom dust filter screen blocks 90% of fine sand.

4.Intelligent car repair shop: ADAS system compatibility solution

Built in G-sensor automatic leveling, supports OTA firmware upgrade.

Product Operate Guide

1.Safety First: 

Turn off the engine and disconnect the battery. Allow existing headlights to cool.

2.Access Assembly: 

Open the hood, locate headlight housing, and remove the dust cover.

3.Connect Bulbs: 

Unplug the old bulb, align new bulb’s base (DO NOT touch glass surface with bare hands). Secure connectors.

4.Test Before Closing: 

Reconnect battery, test lights (low/high beam) before reassembling housing.

5.Adjust Angle: 

Use vehicle’s manual adjustment screws to optimize beam focus.

Pro Tip: Wear gloves to protect bulbs from oils. Check local regulations for brightness compliance.

FAQ

Q1: Are you manufacturing company?

A: Yes. We are factory, located in Guangzhou. Our factory has certificate of lATF 16949.

Q2: What are your main products?

A: We have steering rack ,steering pump ,wheel hub and bearing ,drive shaft ,alternator,control arm and so on.

Q3: What is the lead time?

A: lt takes 3-7 days when stock is available, and 15-40 days when out of stock.

Q4: What is the warranty?

A: Our guarantee period is 60,000 kilometers or 1 year.

Q5: Do you have samples?

A: Yes, we have samples available. For bulk orders, please inquiry us for more details.