Product Introduction
1017110XED95 Multi-layer Tear-resistant OEM-Spec Air Filter for Great Wall Motor
Engineered for optimal engine protection, our 1017110XED95 air filter delivers precision filtration for gasoline engines. Constructed with multi-layer synthetic media, it captures 99.8% of airborne particles (≥5μm), including dust, pollen, and road debris—critical for minimizing abrasive wear. Tested to ISO 5011 global standards, its rigid casing prevents collapse under high airflow, maintaining consistent performance. Field data shows engines paired with this filter experience 30% fewer contaminants ingested vs. generic alternatives, extending component life and optimizing fuel efficiency. A trusted choice for demanding operational environments, it aligns with strict OEM specifications for reliability.
Product Advantage
1. Industry-Leading Filtration Efficiency with ISO Validation
Our filter uses a multi-layer synthetic media to trap 99.8% of airborne particles ≥5μm (dust, pollen, road grit)—tested to ISO 5011 global standards. This precision blocks abrasive contaminants that cause engine wear, delivering 25% higher micro-particle capture than generic paper filters. For high-mileage users, this translates to sustained engine performance and lower long-term maintenance costs.
2. Durable Synthetic Media for Extended Service Life
Crafted with a hydrophobic, tear-resistant synthetic blend, this filter outlasts traditional cellulose options by up to 2x in wet or dusty conditions. The non-woven layers repel water (preventing clogging) and resist breakdown under high vibration—ideal for off-road or tropical climates. Field tests show it maintains peak filtration for 15,000+ miles, reducing replacement frequency.
3. Rigid Casing Ensures Consistent Airflow
A heavy-duty, corrosion-resistant metal casing withstands pressures up to 15 psi without collapsing—critical for maintaining steady airflow to the engine. Third-party tested for 10,000+ hours of continuous use, it eliminates air leaks and performance drops common with flimsy aftermarket filters. Perfect for demanding operational environments.
4. Proven Contaminant Reduction for Engine Health
Data from 500,000+ hours of engine testing confirms our filter cuts harmful particle ingestion by 30% vs. non-OEM alternatives. Less debris means less friction and heat stress on pistons, cylinders, and bearings—extending component life by an average of 18%. Backed by ISO-certified labs, it’s a cost-effective way to avoid expensive repairs.
5. OEM-Spec Precision for Hassle-Free Installation
Engineered to match exact original dimensions and tolerances, this filter installs in minutes without modifications. The pre-oiled media (standard for most variants) ensures instant optimal performance, while the snap-on design secures it tightly—no air leaks, no rework. Ideal for workshops and fleet managers prioritizing reliability.
Technical Parameters
| Parameter | Specification |
| Dimensions (L × W × H) | 145 × 100 × 25 mm (5.7 × 3.9 × 1.0 inches) – Precision-engineered for seamless fit.
|
| Filter Media | High-density synthetic non-woven blend with electrostatic fibers for enhanced particle capture. |
| Filtration Efficiency | 99.8% @ ≥5μm (tested per ISO 5011:2014 standard) – Captures dust, pollen, and road debris. |
| Maximum Flow Rate | 205 m³/h (120 CFM) – Maintains optimal engine airflow without restriction. |
| Collapse Pressure Resistance | 15 psi (103 kPa) – Rigid casing prevents deformation under high intake pressure. |
| Operating Temperature Range | -40°C to +120°C (-40°F to +248°F) – Performs reliably in extreme climates. |
| Service Life | Up to 15,000 miles (24,000 km) or 12 months (whichever comes first) – Extends vs. generic paper filters. |
| Sealing Gasket | Nitrile rubber – Resistant to oil, moisture, and ozone for leak-free installation.
|
Product Uses
Here are specific application scenarios of Air filter:
1. Daily Urban Commuting
Tailored for vehicles in stop-and-go city traffic, where exhaust, pollen, and road dust are constant threats. Its 99.8% filtration efficiency for ≥5μm particles (ISO 5011-certified) reduces carbon buildup and engine wear—extending oil change intervals by 15% vs. generic filters. Drivers get cleaner performance and fewer unscheduled stops, ideal for high-frequency urban use.
2. Long-Haul Freight Transportation
Suited for commercial fleets covering thousands of miles yearly. The filter maintains a steady 205 m³/h airflow, preventing power loss on highways while cutting fuel consumption by up to 3% (third-party fleet data). Its durable synthetic media withstands prolonged high-velocity intake, ensuring consistency on cross-country routes.
3. Extreme Climate Operations
Engineered for -40°C to +120°C environments—from freezing winters to desert heat. The nitrile rubber gasket and corrosion-resistant steel casing retain integrity, avoiding air leaks during cold starts or high-heat idling. Critical for vehicles in northern regions or arid climates where temperature swings ruin standard filters.
4. High-Dust Off-Road/Construction Use
Perfect for dusty job sites, dirt roads, or unpaved terrain. Captures 30% more sand/debris than non-OEM alternatives (500,000+ hours of testing), slashing engine wear. Fleet managers report 20% fewer breakdowns in dust-prone areas, boosting uptime for construction or mining fleets.
5. Fleet Maintenance Optimization
A cost-saver for large fleets. Its 15,000-mile service life reduces replacements by 2x vs. budget filters—cutting labor/parts costs by 18% annually. Matches OEM specs for tool-free installation, ensuring every vehicle stays peak-performing without delays.
Product Operate Guide
For peak performance, start by inspecting your old filter—if clogged with dirt, it can reduce airflow by up to 20% (per ISO 5011 testing). Install the new filter by aligning its nitrile rubber gasket with the housing and pressing firmly until it clicks—this seals out leaks. Replace every 15,000 miles or 12 months to retain 99.8% filtration efficiency. Simple steps for a cleaner engine and fewer breakdowns.
