Product Introduction
1109110XP64XA Synthetic Fuel-efficiency Rigorous Air Filter for Great Wall Motor
Engineered for peak performance, the 1109110XP64XA Air Filter is a critical component in safeguarding engine integrity through advanced air purification. Constructed with multi-layer synthetic media, it captures over 99% of airborne contaminants—including dust, pollen, and particles as fine as 5 microns—preventing abrasive wear on internal engine parts. Rigorously tested to ISO 5011 global standards, it balances high filtration efficiency with optimal airflow, reducing long-term engine stress. Validated by third-party labs, this filter maintains consistent performance across diverse operating conditions, making it a trusted solution for professionals prioritizing durability and OEM-grade reliability. Ideal for maintaining engine health and enhancing operational longevity.
Product Advantage
1. Industry-Leading Filtration Efficiency with Precision Synthetic Media
Our 1109110XP64XA uses a tri-layer synthetic filter medium that traps 99.7% of airborne contaminants—including dust, pollen, and particles as fine as 5 microns—surpassing ISO 5011 global standards. This precision blocks abrasive particles from damaging engine cylinders, pistons, and bearings, reducing long-term wear by an average of 22% vs. basic paper filters. Third-party lab data confirms its efficiency outperforms generic competitors by 15%, making it a top choice for engines operating in dusty or high-pollution environments.
2. Durable, Moisture-Resistant Construction for Extended Service Life
Crafted with non-woven synthetic fibers treated for water and oil resistance, this filter withstands extreme temperatures (-40°C to 120°C) and harsh conditions without tearing, collapsing, or losing shape. Unlike cellulose filters that degrade when wet, our product maintains 98% of its filtration capacity even after 6 months of heavy rain or off-road use. Lab tests show it lasts 30% longer than standard options—cutting replacement frequency and total cost of ownership for users.
3. Optimized Low-Resistance Airflow for Consistent Engine Performance
Engineered with a pleated, aerodynamic design, the 1109110XP64XA delivers 5% more clean air to the engine than competing filters—without sacrificing filtration. This balanced airflow supports stable combustion, preserving power output and fuel efficiency even under heavy loads or highway speeds. Independent dyno testing verifies it avoids the “power lag” common with low-quality filters, keeping engines running at OEM-spec performance over time.
4. Rigorous Third-Party Validation for Zero-Downtime Reliability
Validated by SGS and ISO 5011-certified labs, this filter undergoes 12+ tests: vibration resistance (to prevent media damage in rough terrain), pressure drop checks (to ensure easy airflow), and contaminant retention trials (to block unfiltered air). It’s designed to resist bypass—where dirty air slips past worn media—critical for engines sensitive to debris. This commitment to quality has made it a trusted pick for fleet managers and mechanics prioritizing reliability.
Technical Parameters
| Technical Parameter | Specification | Test Standard / Validation |
| Product Identification | 1109110XP64XA Air Filter | Proprietary OEM-compatible Design
|
| Physical Dimensions (L × W × H) | 285 mm × 170 mm × 55 mm | Direct Caliper Measurement; Fits Standard Housing |
| Filter Media Type | Tri-Layer Synthetic Non-Woven Fiber (Hydrophobic/Oleophobic Coating) | Proprietary Material Engineering; Resists Water/Oil |
| Filtration Efficiency | ≥99.7% @ 5μm Particles (Dust, Pollen, Soot) | ISO 5011:2014 Global Standard for Air Filters |
| Max Clean Air Flow Rate | 220 m³/h @ 2.5 kPa Differential Pressure | Dyno-Tested @ SGS Lab; Balances Efficiency & Flow
|
| Max Operating Pressure Drop | ≤2.5 kPa @ Rated Flow | ISO 5011:2014 Flow Resistance Compliance |
| Temperature Resistance | -40°C to 120°C (Continuous Operation) | Extreme Climate Testing; No Shape Deformation/Warping |
| Durability (Accelerated Aging) | Retains ≥98% Efficiency After 6 Months of Wet/Dusty Simulation | SGS-Certified Long-Term Performance
|
| Bypass Prevention | Reinforced Pleat Lock + Silicone Sealing Gasket | Vibration/Shock Testing (ISO 16949 Compliant) |
| Certifications | ISO 5011:2014, SGS Tested
| Third-Party Authority for Quality Assurance |
Product Uses
Here are specific application scenarios of Air filter:
1. High-Dust Industrial/Construction Zones
Ideal for equipment in sandy or silty job sites—our filter traps 99.7% of 5μm particles (ISO 5011-tested), slashing engine wear by 22% vs. generic filters. It blocks abrasive dust before it reaches critical components, reducing downtime from premature engine damage. Trusted by contractors for consistent protection in dusty, high-stress environments.
2. Long-Haul Transportation Fleets
Designed for vehicles running 8+ hours daily—lasts 30% longer than standard filters (SGS-validated), cutting replacement stops by half. Maintains 98% filtration efficiency after 6 months of heavy use, preserving fuel economy and power output. Fleet managers praise its reliability for lowering operational costs on cross-country routes.
3. Extreme Climate Regions (Deserts/Cold Climes)
Withstands -40°C to 120°C—tested to resist warping in desert heat or cracking in arctic cold. Keeps airflow consistent even in harsh conditions, preventing engine strain from restricted intake. Validated by third-party labs for stability in climate-driven scenarios, perfect for global fleets operating year-round.
4. Off-Road & Rough Terrain Adventures
Built for vibrations—reinforced pleat locks and silicone gaskets prevent media damage on bumpy trails. Blocks 99.7% of debris (ISO 5011) even in mud or rocks, protecting engines from dirt ingress. Popular among off-roaders for worry-free performance in unsealed roads.
5. Commercial Fleet Maintenance Programs
Aligns with OEM specs—SGS-certified for bypass prevention and pressure drop compliance. Reduces unexpected breakdowns by 18% in scheduled fleets, lowering repair costs. Operators value its consistency for extending service intervals and maximizing engine life.
Product Operate Guide
Prep: Clean the air box & check the gasket for damage—prevents debris from bypassing the filter.
Install: Align the filter’s tabs with the housing slots; press firmly (no tools) to seal. Ensures 100% fit per ISO 5011.
Maintain: Replace every 10k km (or 5k km in dusty areas)—follow the pressure drop indicator if equipped.
