A15-3732020BA Fog Light for Chery

Product Introduction

A15-3732020BA Fog Light for Chery

Upgrade your driving safety with our high-performance fog lights, engineered for extreme weather visibility. Featuring 3000K amber/yellow beams that cut through fog, rain, and snow without glare, these durable LED units deliver 200% wider illumination vs. standard halogens.

Key Advantages:

● SAE/DOT Compliant - Road-legal brightness & beam pattern

● Plug-and-Play - Direct OEM fit for 95% vehicles

● Military-Grade Housing - IP68 waterproof & vibration-resistant

● Energy Efficient - Draws 60% less power than halogen alternatives

Product Advantage

1. Fog penetration upgrade | 3000K anti glare yellow light technology

With COB integrated chip+nano coating lens, 3000K gold color temperature can effectively penetrate dense fog/rainstorm, reducing glare reflection by 50% compared with ordinary white light. The spectral peak at 550nm matches the human eye fog recognition area, increasing the visibility distance to 45 meters at night and solving the pain point of the "white wall effect" in rainy and foggy weather.

2. Ultra long durability | Military grade IP68 waterproof and shockproof structure

The shell is made of CNC aviation aluminum and silicone sealing ring, which has passed the extreme temperature test of -40 ℃~125 ℃ and 100G mechanical impact resistance. IP68 level deep waterproofing supports immersion in 1 meter of water for 6 hours, and salt spray testing for over 500 hours without corrosion. The lifespan of 50000 hours is 10 times that of halogen lamps, with zero faults on bumpy mountain roads.

3. Energy saving wide area lighting | 200% wide beam patent

Built in 120 ° wide-angle refractive prism, with an illumination width of 4.5 lanes, and a blind spot coverage rate 200% higher than traditional fog lights. Compliant with SAE J583 road scattering standard, the beam cutoff line is clear and does not interfere with oncoming vehicles.

4. Quick installation | Original factory OEM docking design

98% of car models are line free, with a three-step installation process: ① Remove the original factory cover ② Plug in the CAN bus ③ Lock the anti slip buckle. Equipped with an intelligent decoder to eliminate dashboard errors, installation time is less than 15 minutes. The database covers over 2000 vehicle models and automatically matches input license plates.

5. Dual certification for safety | DOT/ECE dual compliance output

The brightness of 6500LM is precisely controlled within regulatory limits, and the reflective bowl is eliminated from scattering through 3D laser positioning. Each set contains a unique anti-counterfeiting code and supports official website authentication.

Technical Parameters

1. Type of light source

COB integrated LED chip

Single bulb brightness: 6500LM ± 5% (halogen lamp reference value: 1200LM)

Color rendering index: CRI>85

2. Optical performance

Color temperature: 3000K yellow golden light (fog penetration wavelength 550-590nm)

Beam angle: 120 ° wide-angle scattering

Effective illumination distance: 45 meters @ in dense fog environment

3. Durable structure

Protection level: IP68 waterproof and dustproof (soaking in 1 meter of water for 6 hours/dust storm prevention)

Seismic grade: 100G mechanical impact

Working temperature: -40 ℃~+125 ℃

4. Energy efficiency specifications

Input voltage: DC 9-32V (compatible with 12V/24V truck systems)

Single lamp power: 18W (equivalent brightness of 55W for halogen lamps, reducing energy consumption by 67%)

Life cycle: 50000 hours (daily usage of 4 hours=34 years of life)

5. Compliance certification

Optical standard: DOT FMVSS-108&ECE R19

Safe voltage: ISO 16750-2 automotive grade circuit protection

Environmentally friendly materials: RoHS lead-free solder+flame-retardant PC shell

Product Uses

Here are specific application scenarios of Fog Light:

1.Driving on foggy highways

The 3000K golden beam penetrates 92% of particles in dense fog, increasing the effective visible distance to 45 meters. 120 ° wide-angle illumination covers a lane width of 4.5, clearly identifying shoulder markings in rain and fog, reducing the risk of skidding accidents by 62%.

2.Driving at night in rainstorm

Nano hydrophobic lenses actively disperse rain film, combined with 6500LM glare free output, increasing the reflection intensity of asphalt road markings by three times. IP68 waterproof structure resists high-pressure water mist and avoids the risk of short circuit in traditional fog lights during rainy days.

3.Night driving in mountainous areas with multiple bends

The patented wide-angle prism technology expands the illumination width to 18 meters, allowing for the discovery of gravel/animals in curved areas 2 seconds in advance. The 100G military standard seismic design is designed to handle rough road surfaces and prevent poor contact caused by bumps.

4.Ice and Snow Dawn Commute

-40 ℃ low-temperature instant start technology, CRI>85 high color rendering index accurately identifies black ice areas. The aviation aluminum shell is resistant to snow melting agent corrosion and has no corrosion after 500 hours of salt spray testing.

5.Off road exploration auxiliary lighting

18W low-power design compatible with secondary battery system, expandable bracket supports 30 ° depression angle adjustment. MIL-STD-810G seismic rating is designed to withstand extreme off-road vibrations and maintain IP68 sealing performance during sandstorms.

Product Operate Guide

1. Power off preparation

→ Turn off the engine and disconnect the negative terminal of the battery (to prevent short circuit)

→ Remove the original fog light grille (usually without tools)

2. Plug and play

→ Pull out the old fog light interface and directly insert the new product (H8/H11/H16 universal)

Wear gloves for installation (to avoid hand oil affecting LED lifespan)

→ Lock the waterproof buckle (hear a "click" sound)

3. Precise debugging

Connect the battery and start the vehicle for testing (do not touch metal parts)

Adjust the irradiation angle with a Phillips screwdriver:

The center point of the beam should be 10cm lower than the bumper

Coverage width ≈ 3 lanes (refer to road markings)

FAQ

Q1: Are you manufacturing company?

A: Yes. We are factory, located in Guangzhou. Our factory has certificate of lATF 16949.

Q2: What are your main products?

A: We have steering rack ,steering pump ,wheel hub and bearing ,drive shaft ,alternator,control arm and so on.

Q3: What is the lead time?

A: lt takes 3-7 days when stock is available, and 15-40 days when out of stock.

Q4: What is the warranty?

A: Our guarantee period is 60,000 kilometers or 1 year.

Q5: Do you have samples?

A: Yes, we have samples available. For bulk orders, please inquiry us for more details.