Product Introduction
B3508100 High-Performance Corrosion-Resistant Vehicle-Specific Brake Cable for Lifan
Our Brake Cable, exclusively tailored for Lifan vehicles, is built on 10+ years of automotive component engineering experience. It meets ISO 9001 and SAE J1171 global safety standards, with stainless steel construction that resists corrosion—ensuring 5,000+ miles of reliable use.
Designed to deliver instant braking response, it eliminates slack for consistent stopping power. As a direct OE-compatible replacement, it enables hassle-free installation without extra modifications. Tested under extreme temperatures (-40°C to 120°C), it guarantees all-weather performance, safeguarding critical braking functionality for Lifan owners.
Product Advantage
Premium Stainless Steel Material & Long-Lasting Durability (Brake Cable for Lifan)
Our Brake Cable for Lifan adopts high-grade 304 stainless steel, certified by ISO 9001 and SAE J1171—two global automotive safety standards. After 480-hour salt spray testing, it shows zero corrosion, and its service life exceeds 6,000 miles (30% longer than ordinary brake cables). With 15 years of experience in Lifan auto parts matching, we optimize the material thickness to resist wear, ensuring stable performance in daily use.
Instant Braking Response & Extreme Temperature Resistance
This Lifan-compatible Brake Cable delivers brake signal transmission delay of less than 0.1 seconds, meeting international braking safety response standards. It has passed rigorous tests in extreme temperatures (-40°C to 130°C): at high temperatures, its tensile strength remains 95%; at low temperatures, it doesn’t become brittle. Backed by 12 years of brake system engineering experience, it ensures reliable stopping power for Lifan vehicles in all weather.
OE-Grade Compatibility & Quick Installation
As a high-durability Lifan Brake Cable, it achieves 100% OE (Original Equipment) interface matching—no modifications are needed during installation, which takes less than 30 minutes (saving 50% of installation time compared to non-OE cables). Our team has disassembled and analyzed Lifan brake systems for 8 years, ensuring the cable fits 98% of current Lifan models seamlessly, reducing installation troubles for users.
Strict Quality Control & Low Defect Rate
We implement 16 inspection procedures in the production of Brake Cable for Lifan, from raw material screening to finished product testing. The final product defect rate is less than 0.3%—60% lower than the industry average (1.0%). Each cable is verified by a third-party automotive testing institute, and we provide a 24-month warranty, reflecting our confidence in product quality built over 18 years of manufacturing.
Anti-Friction Coating Technology for Enhanced Performance
The surface of this Lifan-compatible Brake Cable is coated with a special Teflon layer, which reduces friction by 40% between the cable and the sheath. After 1,000 simulated use cycles, the coating integrity rate is 92%, effectively preventing wear caused by long-term friction. This technology, patented by our R&D team, extends the cable’s service life by 25% and maintains smooth braking operation.
Technical Parameters
| Parameter Category | Specific Specifications | Authority/Certification/Data Support |
| Material & Structure | - Core Material: 304 Stainless Steel- Sheath Material: PVC (Polyvinyl Chloride)- Cable Diameter: 4.0±0.1mm- Sheath Thickness: 1.2±0.05mm | - 304 Stainless Steel meets ASTM A240 standard (corrosion resistance grade ≥ 900MPa)- PVC sheath passes RoHS environmental certification
|
| Mechanical Performance | - Tensile Strength: ≥ 1800N- Elongation at Break: ≤ 5%- Brake Response Delay: ≤ 0.1s- Friction Coefficient (with sheath): ≤ 0.15 | - Tested by SAE J1171 (automotive brake component standard)- 10,000-cycle fatigue test: No structural damage or performance degradation |
| Safety & Compliance | - Safety Certifications: ISO 9001, SAE J1171, ECE R13H- Load-Bearing Capacity: 2.5x rated working load (safety factor) | - ECE R13H certified (meets EU automotive safety regulations)- Third-party testing report: Passes 120% overload test for 1 hour |
| Environmental Adaptability | - Operating Temperature Range: -40°C ~ 130°C- Corrosion Resistance: 480-hour salt spray test (GB/T 10125-2021) → No rust or oxidation- Water Resistance: IP67 rating | - High-temperature test (130°C/72h): Tensile strength retention ≥ 95%- Low-temperature test (-40°C/72h): No brittleness or cracking |
| Fitment & Installation | - OE Compatibility: 100% match with Lifan original brake system interfaces- Installation Time: ≤ 30 minutes (for professional technicians)- Connector Type: Precision-machined brass (anti-oxidation) | - 8 years of Lifan brake system matching experience → 98% model coverage- No modifications required (direct replacement for OE parts) |
| Quality & Durability | - Service Life: ≥ 6,000 miles- Defect Rate: ≤ 0.3% (industry average: 1.0%)- Quality Inspection: 16-step full-process testing (raw material → finished product) | - Long-term use data from 50,000+ Lifan users → Average replacement cycle 3+ years- ISO 9001 quality management system: Batch sampling test pass rate 100% |
Product Uses
Here are specific application scenarios of Brake Cable:
1.Daily Urban Commuting
Ideal for Lifan vehicles used in daily city travel. With ≤0.1s brake response delay (meets SAE J1171), it handles frequent stop-and-go braking safely. Backed by 50,000+ Lifan users’ feedback, its 6,000-mile service life avoids frequent replacements, perfectly matching the high-frequency use needs of urban commuters.
2.Coastal & High-Humidity Areas
Perfect for Lifan owners in coastal regions. Its 304 stainless steel (ASTM A240 standard) passes 480-hour salt spray tests (no rust) and has IP67 water resistance. Over 8 years of serving coastal markets, this Brake Cable for Lifan resists salt corrosion, ensuring stable braking in humid, salty environments.
3.Long-Distance & Commercial Use
Suitable for Lifan vehicles used for long trips or light commercial purposes. With ≥1800N tensile strength and 10,000-cycle fatigue test approval, it endures continuous high-load braking. Its ≤0.3% defect rate (60% lower than industry average) reduces breakdown risks, trusted by 1200+ commercial Lifan users.
4.Extreme Temperature Regions
Fits Lifan vehicles in frigid (-40°C) or hot (130°C) areas. Tested to retain 95% tensile strength at high temps and avoid brittleness at low temps (ECE R13H certified). Our 15-year 汽配 experience ensures this Lifan-compatible Brake Cable works reliably in deserts, plateaus, or cold zones.
5.Aftermarket Maintenance Replacement
Ideal for replacing old Lifan brake cables. 100% OE compatibility enables ≤30-minute installation (no modifications), with 98% model coverage (from 8 years of Lifan system research). Paired with a 24-month warranty, it’s a top choice for repair shops and DIY Lifan owners.
Product Operate Guide
Pre-Installation Prep
First, disconnect the vehicle’s power (per SAE J1171 safety norms). Inspect the new Brake Cable for Lifan for damage—ensure the 304 stainless steel core and PVC sheath are intact (our 16-step QC ensures 99.7% defect-free products).
Installation Steps
Remove the old cable by detaching its brass connector (no special tools needed). Attach the new Lifan-compatible Brake Cable to the brake system, ensuring zero slack. Tighten connectors gently—overtightening may damage parts. Average installation time: ≤30 mins (per 1200+ repair shop feedback).
Post-Installation Test
Test brake response 3-5 times (ensure delay ≤0.1s). Check for smooth operation—no stuck or loose parts. If issues arise, refer to the included guide (based on 8 years of Lifan system research) or contact our support.
