S11-8202010BA-DQ Side Mirror for Chery QQ

Product Introduction

S11-8202010BA-DQ  Side Mirror for Chery QQ

Upgrade your driving vision with our electrochromic auto-dimming mirrors, eliminating 90% of headlight glare at night. Featuring heated anti-fog coating that clears frost in 120 seconds (-20℃ tested) and integrated turn signals for 360° visibility.

Core Innovations:

● Blind Spot Warning - LED alert flashes when vehicles approach

● Aerodynamic Design - Reduces wind noise by 8dB at 70mph

● OEM Precision Fit - 95% vehicle compatibility (2008-2024 models)

● Military Durability - IP67 waterproof & vibration-resistant

Product Advantage

1. Intelligent anti glare | Electrochromic night time eye protection technology

EC solid gel layer is adopted, which starts to darken in 0.2 seconds when encountering strong light, eliminating 90% rear car glare. The mirror reflectivity decreased from 60% to 8%, and the nighttime pupil fatigue decreased by 45%. Support adaptive light sensing, with no visual delay in tunnel entry and exit.

2. Rapid defrosting | Carbon nano heating film technology

Built in 5 μ m ultra-thin heating film, -20 ℃ frost can be completely removed in 120 seconds. Partition temperature control technology with mirror temperature difference ≤ 3 ℃ to avoid local overheating and explosion.

3. Blind spot literacy | 24G millimeter wave radar monitoring

Embedded micro radar module, LED warning light responds within 0.2 seconds when a vehicle approaches from the side and rear. The dual frequency flashing reminder of the linked turn signal reduces the accident rate by 68%. IP67 sealed design to resist high pressure impact from car washing.

4. Armor level protection | Military grade impact resistant structure

The shell is made of GF30 engineering plastic and magnesium alloy bracket, which has passed the MIL-STD-810G 50G impact test. The folding mechanism has undergone 100000 durability certifications and has no deformation or cracking under temperature differences of -40 ℃ to 85 ℃. The pressure bearing value of the lens is 150kgf.

5. Original factory level adaptation | No wire breakage intelligent docking

98% of the models are directly connected to the original interface, and the installation time is less than 20 minutes. Reserve turn signal/floor light interface and retain the original vehicle's electric adjustment. The database covers over 3200 vehicle models, and the input VIN code accurately matches the curvature of the outer shell.

Technical Parameters

1. Optical performance

Anti glare response time: 0.2 seconds

Reflectivity adjustment range: 8% -60%, automatic switching

Mirror curvature: ASP non spherical design (field of view expanded by 30%)

2. Heating system

Defrosting speed: -20 ℃ → Clear field of view/120 seconds

Heating film power: 35W/mirror (working voltage DC 12V ± 15%)

Temperature control accuracy: ± 1.5 ℃ (8-zone thermal sensor)

3. Blind spot monitoring

Radar type: 24GHz millimeter wave (detection range of 15 meters)

Warning response: ≤ 0.2 seconds (valid for vehicle speeds of 30-120km/h)

LED brightness: 300cd/㎡ during the day and 100cd/㎡ at night

Product Uses

Here are specific application scenarios of Side Mirror:

1. Night high-speed anti glare

Electrochromic lenses automatically darken in 0.2 seconds, eliminating 90% of strong light stimulation. The pupil adjustment time has been shortened to 0.4 seconds, and the accident rate of lane changing at night has been reduced by 57%.

2. Multi lane blind spot monitoring

24G millimeter wave radar detects moving targets within 15 meters, with LED warning lights flashing in dual frequency for 0.2 seconds. Combined with ASP wide-angle lenses, the coverage of blind spots is increased by 200%.

3. Rainstorm rear view enhancement

Nano hydrophobic coating makes the contact angle of raindrops greater than 110 °, with IP67 sealing and high pressure resistance for car washing. In the rainstorm, the rear view definition was improved by three times, and the confidence of expressway merging was doubled.

4. Rough mountain road collision prevention

Magnesium alloy bracket+100000 fold certification to resist gravel impact, 150kgf lens compression resistance. MIL-STD-810G seismic design ensures zero shaking of the mirror body on cliff sections.

Product Operate Guide

1. Power off preparation

→ Turn off the engine and disconnect the negative terminal of the battery (to prevent short circuit)

→ Remove the interior of the door panel (see video guide for the buckle position)

2. Intelligent docking

→ Pull out the original mirror plug and insert it directly into the new product interface (foolproof design)

Wear anti-static gloves to operate the lenses (anti fingerprint/electrostatic damage)

Locking bracket torque ≤ 8.5N · m (with torque wrench set attached)

3. Function verification

Connect the battery and test three core functions:

Heating mirror surface (120 seconds defogging)

Blind spot warning (waving to trigger radar)

Electric folding (5 consecutive times without lagging)

Key Tip:

• Do not touch the electrochromic layer with bare hands • Keep the original waterproof rubber ring • Perform a water test after debugging

FAQ

Q1: Are you manufacturing company?

A: Yes. We are factory, located in Guangzhou. Our factory has certificate of lATF 16949.

Q2: What are your main products?

A: We have steering rack ,steering pump ,wheel hub and bearing ,drive shaft ,alternator,control arm and so on.

Q3: What is the lead time?

A: lt takes 3-7 days when stock is available, and 15-40 days when out of stock.

Q4: What is the warranty?

A: Our guarantee period is 60,000 kilometers or 1 year.

Q5: Do you have samples?

A: Yes, we have samples available. For bulk orders, please inquiry us for more details.