loading
| Availability: | |
|---|---|
| Quantity: | |
SMD360935
HongPro
SMD360935
This SMD360935 is a premium-grade oil filter engineered for superior engine protection. It is constructed with a high-density synthetic filter media, ensuring exceptional filtration efficiency. Independent lab tests confirm it captures over 95% of harmful contaminants (20-40 microns), significantly reducing engine wear.
The filter features a robust steel casing, engineered to withstand operating pressures exceeding 250 psi, and a silicone anti-drain back valve to prevent dry starts. Its precision-threaded base plate guarantees a perfect, leak-free seal.
Designed for extended service intervals, it provides reliable performance and is manufactured to meet or exceed strict OEM standards (ISO 4548). It is the definitive choice for maintaining optimal engine health and performance. Strongly recommended for professional and DIY applications.
At the core of the SMD360935 is a high-density, synthetic blend media engineered to capture microscopic abrasive particles. While standard filters may only trap contaminants above 40 microns, our advanced media is tested to achieve over 98% filtration efficiency for particles as small as 20 microns. This dramatically reduces engine wear by preventing harmful grit from circulating through critical components like bearings and camshafts. This superior filtration is crucial for maintaining optimal oil pressure and ensuring a longer engine lifespan, making it a reliable choice for extended drain intervals.
Durability is non-negotiable. The SMD360935 features a heavy-duty steel canister, pressure-tested to withstand burst pressures exceeding 300 PSI, far beyond typical operating demands. Internally, a high-quality silicone anti-drain back valve prevents oil from draining out of the filter when the engine is off. This eliminates "dry starts," the moment of peak engine wear, by ensuring oil is present instantly upon ignition. This robust design guarantees consistent performance and leak-free operation under extreme conditions.
A perfect seal is paramount. The SMD360935 is manufactured with a precision-machined base plate and consistent, clean threading that ensures a seamless and secure installation. The nitrile rubber gasket is formulated to remain pliable across a wide temperature range, from -40°F to 400°F (-40°C to 204°C), preventing leaks and ensuring a perfect seal for the life of the filter. This attention to dimensional accuracy eliminates the risk of cross-threading or oil leaks, providing peace of mind for both professional mechanics and DIY installers.
Trust is built on verification. The SMD360935 is not just an alternative; it's an upgrade. Its design and performance are validated through a series of rigorous laboratory tests conforming to ISO 4548 standards, covering efficiency, capacity, and burst strength. It meets or exceeds the critical specifications of major OEMs, ensuring direct compatibility and reliable performance without compromising on protection. This commitment to certified quality guarantees that you are installing a component you can trust.
| Parameter | Specification |
| Part Number | SMD360935 |
| Type | Spin-On, Full-Flow |
| Height | 98.5 mm (3.88 in) |
| Outer Diameter | 83.0 mm (3.27 in) |
| Thread Size | M20 x 1.5 |
| Gasket Material | High-Grade Nitrile Rubber (NBR) |
| Gasket OD | 72.5 mm (2.85 in) |
| By-Pass Valve Pressure | 12 - 18 PSI (0.8 - 1.2 bar) |
| Anti-Drain Back Valve | Yes, Silicone |
| Filter Media | Synthetic Glass / Cellulose Blend |
| Filtration Efficiency | ≥ 98% at 20 microns |
| Burst Pressure | ≥ 350 PSI (24 bar) |
| Max Operating Temp. | 257°C (495°F) |
| Gasket Sealing Temp. | -40°C to 204°C (-40°F to 400°F) |
| Anti-Syphon Valve | Yes |
| Standards Met | ISO 4548, OEM Specifications |
Here are specific application scenarios of oil filter:
Frequent short trips and idling in traffic cause fuel condensation and contaminant buildup in oil. The SMD360935's high-capacity synthetic media is designed to hold up to 40% more contaminants than standard filters, effectively managing this increased sludge potential. Its robust silicone anti-drain back valve is crucial here, preventing dry starts after the engine has cooled, which significantly reduces wear during the most critical engine operation moments.
For engines subjected to sustained high RPMs or for users following extended oil change schedules, superior filtration is non-negotiable. With a ≥98% efficiency at capturing particles as small as 20 microns, this filter ensures oil purity under stress, protecting turbocharger bearings and other high-tolerance components. Its durable steel casing, rated for over 350 PSI burst pressure, provides absolute reliability under elevated operating temperatures and pressures.
Fleet managers prioritize total cost of ownership and minimal downtime. The SMD360935 contributes directly by extending engine life. Its ISO 4548-certified performance means consistent, OEM-level quality in every unit, reducing the risk of premature engine wear and costly repairs across an entire vehicle portfolio. The precision threading and secure gasket also prevent installation errors and leaks, streamlining maintenance operations.
For the home mechanic, ease of installation and confidence in the product are key. This filter is designed for a clean, leak-free fit right out of the box. The anti-syphon valve prevents oil spills during changeouts, while the reliable construction means you can trust it to protect your engine until the next scheduled maintenance. It delivers professional-grade protection that is easy to install yourself.
Ensure optimal performance by following these key steps. First, always start with a cool engine and safely elevate the vehicle. Before installing your new SMD360935 filter, lightly lubricate the silicone gasket with a drop of fresh engine oil to ensure a perfect, leak-free seal. Hand-tighten the filter until the gasket contacts the base, then tighten an additional ¾ turn as per standard industry practice—avoid using tools for final tightening. Finally, dispose of your used oil filter responsibly at a designated recycling center.
