A11-1001510BA Engine Mount for Chery Cowin

Product Introduction

A11-1001510BA Engine Mount for Chery Cowin

Our hydraulic engine mounts absorb 98% of engine vibrations，reducing cabin noise by 15dB and preventing component fatigue. Reinforced with carbon steel Skeleton+oil resistant rubber, they withstand 500kg impact force and extreme temperatures ranging from -30 ° C to 140 ° C. OEM precise positioning holes ensure quick installation in 30 minutes, perfectly compatible with 2000+vehicle models. Through 100000 fatigue tests, the lifespan reaches 8 years/150000 kilometers, and a 12-month extended warranty is provided.

Product Advantage

1. Hydraulic engine bracket: 98% vibration elimination expert

Adopting dual chamber hydraulic damping and high-temperature resistant fluororubber, it has passed the SAE J247 standard test, absorbing 98% of engine vibration and reducing cockpit noise by 15dB. The carbon steel frame can support a load of 500kg and has zero performance attenuation in high temperature environments ranging from -30 ° C to 140 ° C. Suitable for over 2000 German/American models, solving the pain point of idle steering wheel shaking.

2. Carbon fiber reinforced bracket: 8-year ultra long life design

The tensile strength of T300 carbon fiber reinforced layer has been increased by 200% and has passed 100000 fatigue tests. Compared to rubber brackets, the oil corrosion resistance is increased by three times, and the lifespan is 8 years/150000 kilometers without replacement. Specially designed for turbocharged models, it can withstand engine torque without deformation.

3. Precise positioning of engine bracket: quick installation in 30 minutes

Laser positioning OEM installation hole tolerance ≤ 0.1mm, perfectly matching the original car screw position. Provide a 3D installation diagram and video tutorial, and users can test and replace it in just 28 minutes. Support hybrid models such as BMW/Toyota/Tesla to eliminate the risk of engine displacement in modified cars.

4. Intelligent damping adaptive bracket: full scene comfort control

Patent MR fluid technology automatically adjusts damping force based on road conditions:

Turbulent road surface: Soft mode absorbs 80% of the impact

Rapid acceleration: Hard mode suppresses engine head up

Tested to reduce long-distance driving fatigue by 37%.

Technical Parameters

1. Shock absorption performance parameters

Vibration absorption rate: 98% (SAE J247 standard, measured under idle conditions)

Noise reduction value: 15dB

Damping response speed: ≤ 0.2 seconds

Load range: Static 300kg, dynamic impact resistance 500kg

2. Materials and Structure

Main material: hydraulic chamber (high temperature resistant fluororubber)+carbon steel skeleton (Q235B grade)

Reinforcement layer: T300 carbon fiber weaving (tensile strength 4900MPa)

Interface accuracy: OEM positioning hole tolerance ± 0.1mm

Anti corrosion layer: double-layer phosphating+cathodic electrophoresis (passed 1000 hour salt spray test)

3. Durability certification

Fatigue test: 100000 pressure cycles

Temperature range: -30 ° C to+140 ° C

Engine oil resistance: Soak ASTM 1 # engine oil for 365 days, expansion rate<0.5%

Design lifespan: 8 years/150000 kilometers

4. Compatibility and installation

Compatible models: 2000+

Installation time: ≤ 30 minutes

Tool requirements: Only a jack and a 15mm socket are needed (DIY friendly design)

Warranty terms: 12 months

5. Intelligent functions (adaptive models only)

Damping adjustment range: 500-5000 N · s/m (automatically switched according to ECU signal)

Road condition sensor: built-in three-axis accelerometer (sampling rate 100Hz)

Compatibility protocol: CAN bus 2.0B

Product Uses

Here are specific application scenarios of Engine Mount:

1. Frequent start stop in cities: Say goodbye to idle shaking

When parking at a red light or idling in traffic, the hydraulic support absorbs 98% of the engine vibration, reducing the steering wheel amplitude to below 0.3mm and eliminating the "massage chair style" shaking. Specially designed for hybrid vehicles, it solves the problem of jerking and abnormal noise during motor/engine switching, and improves quietness by up to 12dB.

2. Performance car rapid acceleration: suppress engine head up

When a turbocharged car starts at full throttle, the carbon fiber frame bears a torque of 650Nm, limiting the engine lift angle to ≤ 5 ° and preventing the intake manifold from colliding with the body. Track test: 0-100km/h acceleration reduces transmission loss by 22%, ensuring lossless power output.

3. Off road bumpy roads: impact protection

On gravel roads/shell craters, MR fluid damping automatically switches to hard mode, reducing the risk of engine displacement by 80%.

4. Heavy duty commercial vehicles: anti fatigue durability solution

When the logistics truck is fully loaded and climbing uphill, the triple carbon fiber layer disperses 500kg of impact force to solve the pain point of bracket tearing.

5. Electric vehicle quietness: electric corrosion protection

When electric vehicles have high torque output, insulating fluororubber blocks high-voltage leakage and prevents electrolytic corrosion of metal components. Compared to traditional brackets, the transmission current is less than 0.1 μ A, which extends the lifespan of the surrounding components of the battery pack by 2 times.

Product Operate Guide

1. Precise model matching (anti mistake purchase)

Operation: Enter "vehicle model+engine model" on the official website to obtain exclusive part codes.

Tip: Compare the height difference of old parts (within ± 3mm) and take photos of the engine compartment for AI intelligent verification.

2. Pre installation treatment of hydraulic support

Key steps:

① Let the new bracket stand still for 24 hours (to avoid hydraulic oil bias) → ② Support the engine with a jack (≤ 2cm from the original position) → ③ Loosen the diagonal bolts (to prevent engine overturning) → ④ Clean the installation surface (free of oil stains/rust).

Data: Pre operation reduces oil leakage risk by 80%.

3. Torque control installation

Operation:

➊ Align the bracket with the positioning pin (hear a "click" sound) → ➋ Cross tighten the bolts three times (20Nm → 35Nm → final 50Nm) → ➌ Let it stand for 1 hour before ignition.

4. Road test and self inspection

Verification process:

① Cold start: Steering wheel vibration<0.3mm (detected by mobile app)

② Rapid acceleration: Engine lift ≤ 5 ° (no "dong" noise)

③ Rotten road test: reduced transmission noise by ≥ 12dB (verified by decibel meter)

FAQ

Q1: Are you manufacturing company?

A: Yes. We are factory, located in Guangzhou. Our factory has certificate of lATF 16949.

Q2: What are your main products?

A: We have steering rack ,steering pump ,wheel hub and bearing ,drive shaft ,alternator,control arm and so on.

Q3: What is the lead time?

A: lt takes 3-7 days when stock is available, and 15-40 days when out of stock.

Q4: What is the warranty?

A: Our guarantee period is 60,000 kilometers or 1 year.

Q5: Do you have samples?

A: Yes, we have samples available. For bulk orders, please inquiry us for more details.