1014012770 Front Shock Absorber Bracket for Geely X7

Product Introduction

1014012770 Front Shock Absorber Bracket for Geely X7

Our Front Shock Absorber Bracket is a critical structural component that securely connects your vehicle's shock absorber to the chassis. Engineered for exceptional strength and durability, it ensures precise alignment and reliable performance of your front suspension system.

Constructed from high-grade stamped steel or forged alloy, it is built to withstand immense stress, road vibrations, and corrosive elements. This direct OEM replacement guarantees a perfect fit, restoring your vehicle's stability, handling, and ride comfort. A faulty bracket can compromise safety. Ensure your suspension's integrity with our high-quality, rust-resistant bracket for a smoother and more secure drive.

Product Advantage

1. Excellent structural strength and durability | Superior Structural Strength&Durability

Our front shock absorber bracket is made of high-strength boron steel through precision hot stamping process, with a tensile strength exceeding 500 MPa. This means that it can withstand huge impact loads and continuous road vibrations, effectively avoiding common bending or fracture problems of original parts. After more than one million bench fatigue tests, its durability far exceeds industry standards, ensuring the same lifespan as the vehicle and providing you with a permanent solution.

2. Precise OEM Fit&Hassle Free Installation | Precise OEM Fit&Hassle Free Installation

Each bracket is developed with 100% original factory data scanning, ensuring that its hole position, angle, and shape perfectly match your car. The installation process does not require any drilling, cutting, or modification, truly achieving direct replacement. We provide accurate OE number matching services. You only need to enter the vehicle model information to find the absolutely matching parts, greatly saving maintenance time and eliminating positioning deviation and abnormal wear caused by installation discrepancies.

3. Premium Anti Corrosion Protection

To ensure long-lasting durability in harsh environments, we use Full Electrocoating treatment and offer additional Zinc Nickel Plating options. Its salt spray resistance test ability exceeds 720 hours, far exceeding ordinary spray painted parts. It can effectively resist the erosion of rainwater, snow melting agents, and road salt, completely preventing strength loss and safety hazards caused by corrosion. It is particularly suitable for use in high humidity or cold winter areas.

4. Enhanced Suspension Performance&Safety

A sturdy bracket is the cornerstone for the normal operation of the suspension system. It can ensure that the shock absorber always maintains precise OE Alignment Angles, thereby maximizing the tire contact area and restoring the vehicle's original handling stability and steering accuracy. It directly eliminates the driving troubles caused by the deformation and abnormal noise of the bracket, and more importantly, it firmly fixes the key shock absorber components, which is an indispensable part of safeguarding your driving safety.

Technical Parameters

1. Material&Manufacturing:

Using high-strength low-carbon alloy steel (HSLA), it is formed through precision stamping and robotic welding to ensure structural consistency and ultra-high strength. Key areas undergo heat treatment to significantly enhance their fatigue and impact resistance.

2. Surface Treatment:

After comprehensive electrocoating treatment, it provides an excellent rust resistant substrate. The outer layer is sprayed with epoxy anti corrosion top coat, which has passed the 480 hour neutral salt spray test (NSS test) and has a corrosion resistance ability far exceeding the original factory standard, effectively coping with rain and snow weather and erosion from snow melting agents.

3. Load&Strength Performance:

The static load capacity exceeds 1500 kilograms, and the dynamic fatigue strength has undergone over 1 million bench tests without cracks or deformation. Its tensile strength is not less than 500 MPa, ensuring structural integrity even in extreme road conditions and guaranteeing suspension geometric stability.

4. Installation&Compatibility:

All installation hole positions, thread specifications (such as M12x1.5), and overall geometric shapes are precision OEM Specially developed to ensure perfect matching with the vehicle's original shock absorbers, bearings, and body installation points, achieving seamless Direct Bolt On Replacement without any modifications.

5. Certification&Standards:

The product production system complies with the IATF 16949:2016 international automotive quality management system standard, and the product safety specifications comply with the relevant regulations of the US DOT and European ECE. The quality is reliable and globally applicable.

6. Weight&Packaging:

The average weight of a single item is about 2.5-4.5 kg (depending on the specific vehicle model). It is packed in a single independent carton with foam liner inside to ensure zero scratch and damage during transportation.

Product Uses

Here are specific application scenarios of Front Shock Absorber Bracket:

1. Dealing with common corrosion and damage replacement | Addressing Common Corrosion&Damage

If you live in rainy, snowy or coastal areas, and the vehicle chassis is exposed to moisture and snow melting agents for a long time, the front shock absorber bracket is one of the most susceptible components to severe corrosion. Once large areas of rust, perforation, or structural wear are found on the surface of the bracket, it must be replaced immediately. Our high anti-corrosion coating bracket can effectively solve this problem, prevent sudden suspension failure caused by corrosion and fracture, and ensure driving safety.

2. Post Collision Repair&Chassis Inspection

Even minor collisions or frequent driving on bumpy roads in the front of the vehicle can result in significant impact forces that can cause the bracket to bend or deform imperceptibly. This will change the suspension geometry, causing tire wear, vehicle deviation, and abnormal noise. When conducting accident repairs or chassis inspections, it is essential to prioritize them as key inspection items. Replacing our original factory standard bracket can accurately restore suspension parameters and ensure stable handling.

3. Solve Noise&Loose Handling

When you pass speed bumps or bumpy roads, if you hear a dull "clunking" sound or metal friction sound coming from the front, and feel that the steering wheel has become larger and the body is swinging, it is likely caused by deformation of the shock absorber bracket or cracking of the connection point. Replacing our sturdy new bracket can completely eliminate these abnormal noises, restore a compact and solid chassis texture, and enhance driving confidence and comfort.

4. Preventive Maintenance for High Mileage Cars

For vehicles with a mileage exceeding 100000 miles, their metal components will fatigue due to long-term vibration and stress. Even if the appearance is intact, its internal strength may decrease. As a key chassis structural component, preventive replacement can prevent it from suddenly failing during the journey, making it a highly cost-effective investment and adding peace of mind to your long journey.

5. Foundation for Complete Suspension Overhaul

When you replace your car with new shock absorbers, springs, or perform a comprehensive suspension system upgrade, a sturdy and reliable new bracket is the perfect foundation for all of this work. It can ensure that all new components work in the optimal geometric position, fully utilize their performance, and avoid affecting the effectiveness and lifespan of new components due to fatigue of old brackets.

Product Operate Guide

1. Safety first, professional operation

We strongly recommend that you entrust the installation work to a professional maintenance technician. This operation involves high-risk steps such as lifting the vehicle and dismantling springs, requiring specialized tools (such as spring compressors) and professional knowledge. Incorrect installation may result in serious personal injury or vehicle damage.

2. Introduction to Core Steps

Before installation, be sure to use a lift to safely support the vehicle and remove the tires. It is crucial to use a torque wrench and tighten all bolts to the original factory specifications in Newton meters (Nm) to ensure that the bracket is secure and to avoid thread damage. After installation, four-wheel alignment must be performed to restore the correct suspension geometry parameters, ensuring vehicle stability and normal tire wear.

FAQ

Q1: Are you manufacturing company?

A: Yes. We are factory, located in Guangzhou. Our factory has certificate of lATF 16949.

Q2: What are your main products?

A: We have steering rack ,steering pump ,wheel hub and bearing ,drive shaft ,alternator,control arm and so on.

Q3: What is the lead time?

A: lt takes 3-7 days when stock is available, and 15-40 days when out of stock.

Q4: What is the warranty?

A: Our guarantee period is 60,000 kilometers or 1 year.

Q5: Do you have samples?

A: Yes, we have samples available. For bulk orders, please inquiry us for more details.