1016055007 Intake Mainfold Gasket for Geely CK

Product Introduction

1016055007 Intake Mainfold Gasket for Geely CK

Our Intake Manifold Gasket is a critical sealing component for vehicle engines, designed to seal the gap between the intake manifold and engine block. It prevents leaks of air, fuel, and coolant, ensuring stable airflow into the combustion chamber and maintaining optimal air-fuel ratio.

Crafted from high-performance composite rubber (withstands -40℃ to 200℃), it resists oil, heat, and aging for long-term reliability. Compliant with OEM standards, it fits most mainstream car models. By stopping leaks, it avoids engine power loss, rough idling, or overheating, safeguarding your engine’s performance and lifespan.

Product Advantage

1.99.8% Precision Sealing (High-Performance Intake Manifold Gasket)

Made of EPDM rubber + reinforced metal skeleton composite material, it achieves 99.8% sealing rate—effectively blocking air, fuel, and coolant leaks between the intake manifold and engine block. Avoids issues like rough idling, 15% power loss, or engine overheating caused by poor sealing, ensuring stable combustion.

2.Extreme Temperature & Oil Resistance

Withstands -40℃ to 220℃ extreme temperatures (20℃ higher than ordinary gaskets), maintaining flexibility in cold winters and high-temperature engine environments. Resists corrosion from engine oil and coolant, passing 480-hour salt spray tests without cracking—great for long-term use in harsh conditions.

3.Long-Lasting Durability (Durable Automotive Intake Gasket)

Added anti-aging additives extend service life to 3 years or 60,000km—20% longer than industry averages. The metal skeleton enhances structural strength, preventing deformation under engine vibration (vibration resistance up to 50Hz), reducing frequent replacement and maintenance costs for users.

4.98% Vehicle Compatibility

Complies with OEM standards, precisely matching 98% of mainstream models (Toyota, Honda, Ford, BMW, Volkswagen). We provide a detailed model-matching table, ensuring the gasket fits perfectly with original intake manifolds—no trimming or modification needed, saving installation time.

5.Easy Installation & Time-Saving

Pre-coated with high-temperature resistant sealant (no need for additional glue), it can be installed directly. The flexible material adapts to slight surface irregularities of the engine block, cutting installation time by 30% compared to traditional gaskets—suitable for both professional mechanics and DIY enthusiasts.

6.Safety-Certified Reliability

Passes ISO 9001 and TS 16949 quality certifications. Under 0.8MPa pressure tests, it maintains no leakage for 24 hours—eliminating safety risks like coolant entering the combustion chamber. Provides stable protection for engine performance and lifespan.

Technical Parameters

1.Basic Specifications

Size range: Length 180-350mm × Width 120-280mm × Thickness 3-8mm (customizable for specific vehicle models);

Net weight: 50-180g (varies by size, no extra load on engine components);

Structure: 3-layer composite (EPDM rubber layer + metal reinforcement skeleton + anti-adhesion coating);

Sealing area: 200-600cm² (matches intake manifold and engine block contact surfaces).

2.Material Parameters

Main material: EPDM rubber (content ≥ 75%, high elasticity and anti-aging);

Reinforcement skeleton: Galvanized steel sheet (thickness 0.2-0.5mm, corrosion resistance ≥ 480 hours in salt spray test);

Coating: High-temperature resistant silicone sealant (pre-coated, no additional glue needed);

Operating temperature range: -40℃ to 220℃ (maintains flexibility without cracking or hardening).

3.Core Performance Indicators

Sealing rate: ≥99.8% (no air/fuel/coolant leakage under standard working conditions);

Pressure resistance: ≤0.8MPa (maintains tight seal for 24 hours without deformation);

Vibration resistance: Stable performance under 10-50Hz vibration (avoids displacement from engine vibration);

Aging resistance: After 3000 hours of high-temperature aging test, elasticity retention rate ≥ 85%.

4.Compatibility & Installation

Applicable models: 98% of mainstream brands (Toyota, Honda, Ford, BMW, Volkswagen, Mercedes-Benz, Audi);

Compliance standard: OEM matching (fits original intake manifold and engine block without trimming);

Installation requirement: Direct replacement, pre-coated sealant (installation time ≤ 40 minutes for professionals);

Interface type: Matches standard intake manifold bolt holes (positioning accuracy ±0.1mm).

5.Safety & Certification

Certifications: ISO 9001, TS 16949, ECE R117 (meets global automotive safety and environmental standards);

Leakage test: No visible leakage under 0.8MPa pressure for 24 hours (per GB/T 18265-2016 standard);

Environmental protection: RoHS compliant (no heavy metals like lead, mercury, or harmful volatile substances).

6.Operating Conditions

Compatible media: Engine oil (API SN/CF grade), coolant (ethylene glycol type), compressed air;

Humidity tolerance: 0-95% RH (no performance degradation in humid environments);

Recommended replacement cycle: 3 years or 60,000km (or when engine shows rough idling/ coolant leakage).

Product Uses

Here are specific application scenarios of Intake Mainfold Gasket:

1. Maintenance scenarios for old vehicles

The vehicle is over 3 years old or has a mileage of over 60000 kilometers. The original gasket is prone to aging and cracking, which can cause leakage and idle shaking of the cooler. This product has an aging resistant design (with a lifespan of 60000 kilometers) and can be directly replaced. With a 99.8% sealing rate, it can solve the problem of fluid leakage, avoid engine overheating caused by seal failure, help restore stable performance to old cars, and reduce maintenance frequency.

2. Vehicle use scenarios in high-temperature areas

In southern summer or tropical regions, the engine compartment temperature often exceeds 180 ℃, and ordinary gaskets are prone to softening and air leakage. This product is resistant to high temperatures of 220 ℃ and maintains elasticity even in high-temperature environments, ensuring that the intake and fuel do not leak and avoiding 15% power loss caused by seal failure. It is suitable for daily commuting in high-temperature areas.

3. Long distance self driving scenarios

When driving on highways across provinces, the engine runs at high load for a long time, requiring high tolerance to gasket pressure. This product can withstand a pressure of 0.8MPa, with no leakage for 24 hours, and is resistant to 50Hz engine vibration, avoiding faults caused by gasket displacement during long-distance travel and ensuring smooth travel.

4. Scene of repair shop replacement

When repair shops replace gaskets for different vehicle models, they often need to trim them due to poor compatibility. This product is compatible with 98% of mainstream car models, accurately matches the original factory size, pre applies sealant without the need for additional coating, shortens installation time by 30%, improves maintenance efficiency, and reduces operational difficulty.

5. Driving scenes in cold regions

The winter temperature in the north can drop as low as -30 ℃, and ordinary gaskets are prone to hardening and cracking. This product is designed to withstand low temperatures and maintain flexibility at -40 ℃, avoiding seal failure at low temperatures, preventing cold air from leaking into the intake manifold, ensuring stable air-fuel ratio after engine start in winter, and reducing cold start vibration problems.

Product Operate Guide

1.Ensure the engine is cool and disconnect the battery. Clean the intake manifold and engine block contact surfaces (remove old gasket residue and dust) with a dry cloth.

2.Align the new gasket (pre-coated with sealant, no extra glue needed) with the bolt holes. Reattach the intake manifold, tightening bolts evenly in a crisscross pattern (follow torque specs: 15-20 N·m).

3.Reconnect the battery, start the engine, and check for 5 minutes—ensure no coolant/air leaks. Finish in ~40 minutes.

FAQ

Q1: Are you manufacturing company?

A: Yes. We are factory, located in Guangzhou. Our factory has certificate of lATF 16949.

Q2: What are your main products?

A: We have steering rack ,steering pump ,wheel hub and bearing ,drive shaft ,alternator,control arm and so on.

Q3: What is the lead time?

A: lt takes 3-7 days when stock is available, and 15-40 days when out of stock.

Q4: What is the warranty?

A: Our guarantee period is 60,000 kilometers or 1 year.

Q5: Do you have samples?

A: Yes, we have samples available. For bulk orders, please inquiry us for more details.