A11-6GN3501080 Brake Pad for Chery Amulet

Product Introduction

A11-6GN3501080 brake pad for Chery Amulet

Our brake pads deliver precision stopping power for vehicles worldwide. Engineered with ceramic & semi-metallic composites, they provide 30% faster heat dissipation versus standard pads, preventing brake fade during aggressive driving. The laser-cut chamfers & slot designs eliminate vibration noise.

Key advantages include:

● 0.42-0.45 optimal friction coefficient

● -40°C to 650°C extreme temperature tolerance

● Shim-insulated backing plates reducing NVH by 15dB

● 50,000+ km lifespan under urban driving conditions

Ideal for passenger cars to light trucks, our pads ensure quieter, cooler, and more responsive braking – tested to ISO 26867 safety standards.

Product Advantage

1. Military grade high-temperature resistant formula

Using titanium alloy reinforced ceramic substrate, the friction coefficient remains stable at 0.45 ± 0.02, and the peak heat resistance reaches 650 ° C. Laboratory tests have shown that after 10 consecutive 100km/h → 0 emergency braking, the braking distance is shortened by 2.1 meters without any thermal degradation phenomenon. The backboard is coated with a 400 ° C anti bite coating to prevent caliper adhesion.

2. Ultra quiet NVH control technology

3D laser cutting with oblique angle and noise reduction groove to disperse resonance frequency, combined with 0.8mm composite noise reduction sheet, passed SAE J2521 noise test.

3. Global environmentally compliant formula

0% copper+0% heavy metal formula (compliant with EU REACH/North American NASTC regulations) reduces dust emissions by 60%. Using aramid and alumina environmentally friendly fibers, the wear rate is ≤ 0.8mm/10000 kilometers. Extend the cleaning cycle of the wheel hub by three times to protect the luster of the aluminum alloy wheel hub.

4. Intelligent thermal conductivity structure design

The honeycomb shaped heat dissipation channel backplate increases the thermal conductivity by 30%, and with a 2.5mm grooved friction layer, the brake disc temperature is reduced by 45 ° C. The wet friction coefficient remains ≥ 0.38, and the braking distance on rainy and foggy days is reduced by 11%.

Technical Parameters

1. Core friction material

Formula type: Titanium reinforced ceramic composite (ceramic fiber 60%+titanium powder 15%+aramid 25%)

Friction coefficient: 0.45 μ ± 0.02 (E-mark R90 certification, testing standard ISO 26867)

Environmental certification: 0% copper/0% asbestos (compliant with EU REACH Annex XVII&US EPA 130)

2. Physical structural parameters

Backboard material: laser welded stainless steel (thickness 6.0 ± 0.2mm)

Silencing system: Three layer composite silencing sheet (0.8mm rubber+0.3mm adhesive layer+1.2mm steel back)

Heat dissipation design: honeycomb ventilation groove (depth 2.5mm, density 18 holes/cm ²)

3. Extreme performance indicators

Working temperature: -40 ° C~650 ° C

Critical point of thermal attenuation: 580 ° C (friction coefficient ≥ 0.38 after 10 consecutive 100-0km/h braking)

Shear strength: ≥ 28MPa (SAE J661 test standard)

4. Durability and wear data

Design lifespan: 50000 kilometers (urban working conditions, wear rate ≤ 0.8mm/10000 kilometers)

Salt spray corrosion resistance: 720 hours (ASTM B117 standard, surface corrosion area<5%)

Dust generation: 0.85g/braking (GM 9125P dust test method)

Product Uses

Here are specific application scenarios of brake pad:

1. Urban commuting vehicles

User pain points: Frequent start stop leading to abnormal noise and dust pollution of the wheel hub

Solution:

35dB ultra quiet design+copper free formula, eliminating "squeaking" noise and reducing dust by 60%. Paired with 0.8mm composite sound-absorbing film, the start and stop of traffic lights are smooth and quiet. With a lifespan of 50000 kilometers, it can cope with daily congested road conditions and extend the wheel cleaning cycle by three times.

2. Efficient operation of commercial vehicle fleets

Core requirement: Reduce braking costs per kilometer and comply with transportation regulations

Technical support:

The 28MPa high shear strength backplate is resistant to heavy load impact and has an ultra-low wear rate of ≤ 0.8mm/10000 kilometers. Meet the EU REACH copper free regulation to avoid cross-border transportation compliance risks. Tested to save 22% of annual maintenance costs for logistics fleets.

3. Performance car/modified car upgrade

Performance shortcomings: Thermal degradation during intense driving on the track, fluctuation in braking distance

Competitive plan:

650 ° C heat-resistant titanium ceramic formula, with a braking distance fluctuation of less than 0.5 meters for 10 consecutive laps on the New York North track. The honeycomb heat dissipation backplate reduces the temperature of the brake disc by 45 ° C and supports 15 rapid braking cycles from 200km/h to 0 without attenuation.

4. Extreme cold/high temperature areas

Regional challenges: Low temperature braking stiffness, desert high temperature heat exhaustion

Enhanced performance:

-Maintain 90% elasticity at 40 ° C, with a high temperature friction coefficient of ≥ 0.38 at 650 ° C. ASTM B117 720 hour salt spray protection for Nordic snowmelt/Middle Eastern sand and dust corrosion.

5. Classic old car repair

Difficulty in fixing: missing accessory data for discontinued car models, restoration of original foot feel

Product Operate Guide

1. Pre installation check (30 seconds)

Operation: Verify the OE number laser engraved on the brake pad backing plate

Warning: Clean the contact surface of the brake disc with the accompanying ethanol cotton pads (to prevent abnormal noise)

Tip: Scan the packaging QR code to obtain a 3D disassembly animation

2. Non destructive installation techniques

Operation: Insert brake pads pre coated with noise reducing paste (do not touch the friction surface)

Tool: Use C-shaped calipers to compress the piston (saving 90% effort)

Standard: The installation of the snap spring requires a "click" sound confirmation (anti trip test)

3. Key debugging nodes

Operation: After loading, press the brake pedal 20 times to activate the self positioning system

Validation: No brake warning light on the instrument panel+no metal friction sound when braking in place

Assist: Use decibel testing app to detect noise<35dB (iOS/Android compatible)

4. Intelligent running in strategy

Operation: Avoid sudden braking>0.5G for the first 200 kilometers (G value record sticker attached)

Monitoring: Wheel hub temperature ≤ 120 ° C after continuous braking (detected by infrared thermometer)

Guarantee: Contact video customer service immediately for abnormal vibrations (24/7 multilingual support)

FAQ

Q1: Are you manufacturing company?

A: Yes. We are factory, located in Guangzhou. Our factory has certificate of lATF 16949.

Q2: What are your main products?

A: We have steering rack ,steering pump ,wheel hub and bearing ,drive shaft ,alternator,control arm and so on.

Q3: What is the lead time?

A: lt takes 3-7 days when stock is available, and 15-40 days when out of stock.

Q4: What is the warranty?

A: Our guarantee period is 60,000 kilometers or 1 year.

Q5: Do you have samples?

A: Yes, we have samples available. For bulk orders, please inquiry us for more details.