T11-290603040 Stabilizer Link for Chery

Product Introduction

T11-290603040 Stabilizer Link for Chery

The stabilizer bar connecting rod is a critical safety component of the vehicle chassis suspension system. It is like a sturdy 'arm' that connects the two ends of the stabilizer bar (anti roll bar) to the left and right suspension components of the vehicle.

Core role:

● Transmitting torque: When the vehicle turns or travels on rough roads, the body will tilt. The stabilizer bar generates torque to resist roll. The core function of the connecting rod is to accurately and reliably transmit this torque from the stabilizer bar to the left and right suspensions.

● Reduce body roll: By effectively transmitting torque, it promotes the coordinated work of the left and right suspensions, significantly reducing the body tilt angle when the vehicle is cornering, improving handling stability and cornering confidence.

● Improving tire adhesion: Reducing excessive body roll helps maintain better ground contact, optimize grip, and enhance driving safety (especially on wet roads or emergency lane changes).

● Maintain suspension geometry: Ensure that the stabilizer bar can work according to the design intent and maintain the correct suspension dynamic characteristics.

Product Advantage

1. Long life and durable ball head design - Say goodbye to annoying noises

*Made of high-strength alloy steel forged ball head, filled with special high-temperature lubricating grease inside, and matched with multi-layer composite sealing liner. After more than 50000 rigorous multi axial fatigue tests, the ball joint is ensured to remain smooth and seamless under severe bumps and frequent turns. Effectively eradicating the "clunking" noise caused by aging stabilizer bar linkages, providing chassis quietness and reliable connections like a new car, significantly extending the replacement cycle of stabilizer bar linkages.

2. Double lip dustproof and waterproof sealing technology - resistant to harsh road conditions erosion

*Innovative application of dual lip dust cover design, combined with highly weather resistant synthetic rubber material. The sealing system has undergone enhanced testing simulating China's dusty, rainy, and snow melting environment, resulting in a 40% increase in dust and water resistance levels. Effectively blocking the intrusion of sediment, water vapor, and corrosive substances into the ball head and liner, preventing grease failure and early wear of components, ensuring stable performance of the stabilizer bar linkage even in harsh road conditions and winter snowmelt sections, is a key guarantee for extending the service life of the stabilizer bar.

3. Strengthen structure&precise dimensions - ensure factory level handling stability

The connecting rod body is formed by cold forging process or thickened seamless steel pipe, and the key stress areas are locally strengthened, resulting in a tensile strength increase of more than 15%. All installation hole sizes, center distance lengths, and thread specifications are 100% strictly manufactured according to the original OE data. Ensure perfect and non-destructive replacement, accurately transmit stabilizer bar torque, effectively suppress vehicle cornering and tilting, restore factory precision steering feel and high-speed driving stability, and enhance driving safety confidence.

4. Convenient installation design&wide adaptability - time-saving, worry free, perfect replacement

The product design highly restores the original factory structure, providing hard connecting rods or adjustable bushings with pre-set correct angles. Provide high-quality anti loosening nuts or self-locking nuts, as well as necessary installation washers. Combining clear product labels and a detailed online vehicle database makes it easy and fast to search for suitable stabilizer bar linkages and perform installation and replacement. Compatible with over 95% of mainstream sedans, SUVs, and light trucks on the market, it is an ideal accessory for efficient repair shops and DIY enthusiasts to choose with confidence.

5. Strict quality certification&ultra long warranty - a worry free choice for driving safety

Each connecting rod undergoes 100% rigidity testing, torque fatigue testing, and salt spray anti-corrosion testing before leaving the factory. The production process strictly follows the IATF 16949 international automotive quality management system standard, with key performance indicators exceeding or meeting the original OE specifications.

Technical Parameters

Product Uses

Here are specific application scenarios of Stabilizer Link:

1. Eliminate the rattling noise on bumpy roads and restore driving quietness

When the vehicle passes through speed bumps or damaged road surfaces, the worn stabilizer bar connecting rod ball joint will loosen, causing annoying "clunking" and "clicking" noises. After replacing the new connecting rod, the high-strength alloy ball head and double lip sealed dust cover are tightly matched, completely eliminating chassis noise caused by loose connections and bringing the cockpit back to peace. Especially suitable for urban commuters and sensitive car owners, bidding farewell to the frustrating experience of every bumpy ride.

2. Suppress cornering roll and enhance confidence in high-speed handling

Does the vehicle tilt excessively when turning? The aging connecting rod cannot effectively transmit the torque of the stabilizer bar, resulting in a decrease in tire grip and shaking like a boat when cornering. The cold forged reinforced body and low friction ball head of the new connecting rod can respond to steering commands in real time, reducing body roll by up to 40%, allowing high center of gravity vehicles such as SUVs/MPVs to regain sedan level cornering stability, and improving driving safety on rainy days and mountain roads.

3. Eliminate the feeling of looseness in the steering wheel and restore precise steering feedback

If there is an increase in virtual position of the steering wheel, a decrease in return force, or fuzzy feedback from the road surface, it is often due to the failure of the stabilizer bar linkage, resulting in suspension geometry misalignment. The original factory grade dimensional accuracy of the new connecting rod and the preloaded reinforced bushing can firmly lock the connection point, eliminate the clearance between the steering system and the suspension, and make the steering wheel feel tight and precise again,.

4. Prevent abnormal tire wear and save on tire replacement costs

Failed connecting rods can cause irregular bouncing of the wheels during bumps, resulting in wavy (serrated) wear or one-sided uneven wear of the tires. After replacement, optimize the force transmission path to ensure that the tire always touches the ground vertically, avoiding early wear.

5. Enhance the stability of emergency lane changes and reduce the risk of losing control

When avoiding obstacles or changing lanes at high speeds, a damaged connecting rod may cause the vehicle to sway violently or even tilt its tail. The dynamic tensile strength of the new connecting rod is ≥ 15kN, which can instantly transmit the anti torque of the stabilizer bar, greatly suppress the S-shaped swing, shorten the body return time by 20%, and provide key safety redundancy for family cars and performance car enthusiasts.

6. Solve the loose feeling of the chassis and enhance the overall feel of the new car

The old connecting rod causes the chassis to be connected in a "broken and tangled" manner, resulting in loose vibrations like a broken frame when passing over obstacles. After replacement, the integrated forging structure and hydraulic forming liner will rigidly connect the stabilizer bar and suspension again, making the overall integrity of the chassis refreshed. The effect of repairing classic cars or old cars over 100000 kilometers is particularly significant, with a small cost to reproduce the "tight chassis" texture.

Product Operate Guide

1. Safety preparation

Park the vehicle on a flat surface, apply the handbrake, and place triangular blocks under the wheels

Lift the vehicle with a jack and bracket, and remove the wheels

Prepare torque wrench and ball head separator (avoid violent impact)

2. Disassemble the old connecting rod

Spray bolt loosening agent and let it stand for 10 minutes

First loosen the lower fixing nut, then loosen the upper nut

Use a ball head separator to push out the connecting rod (avoid hitting with a hammer!)

3. Install a new connecting rod

First, tighten the nuts at both ends by hand (ensuring that the lining is not twisted)

The key! After the vehicle lands, tighten it with a torque wrench:

Upper end: 40-50 N · m

Lower end: 70-90 N · m

4. Ultimate Test

Install the car wheels and check for interference by turning left and right after landing

Tested the speed bump on the road and confirmed that there was no "clunking" noise

Suggest doing four-wheel alignment (offset needs to be adjusted)

FAQ

Q1: Are you manufacturing company?

A: Yes. We are factory, located in Guangzhou. Our factory has certificate of lATF 16949.

Q2: What are your main products?

A: We have steering rack ,steering pump ,wheel hub and bearing ,drive shaft ,alternator,control arm and so on.

Q3: What is the lead time?

A: lt takes 3-7 days when stock is available, and 15-40 days when out of stock.

Q4: What is the warranty?

A: Our guarantee period is 60,000 kilometers or 1 year.

Q5: Do you have samples?

A: Yes, we have samples available. For bulk orders, please inquiry us for more details.